Sharp 32US60 32US60 Operation Manual - Page 31
Press, to exit., When the BLUE SCREEN is set to
View all Sharp 32US60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Set Up (Continued) 6 Press MENU to exit. When the BLUE SCREEN is set to "ON" No signal Blue screen Power turns off automatically after 15 minutes Standby mode Note: • Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN "OFF". • While INPUT 1 or 2, is selected, the BLUE SCREEN will not be shown even if the BLUE SCREEN is turned on. 31
31
6
Press
MENU
to exit.
When the BLUE SCREEN is set to “ON”
Note:
•
Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN “OFF”.
•
While INPUT 1 or 2, is selected, the BLUE SCREEN will not be shown even if the BLUE SCREEN is
turned on.
Set Up (Continued)
No signal
Blue screen
after 15
minutes
Power turns off
automatically
Standby mode