Sharp 3800M Operation Manual - Page 69
Press these keys, Comments
View all Sharp 3800M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Fax Setup 10 ABC or Press "1" if you want to specify the number as a Chain Dialing number (see "Chain Dialing for Long Numbers" in this section). Otherwise, press "2". 11 Return to Step 4 to store STOP Step 4 or STOP . . . another number, or press the STOP key a number of times until you exit. If the number is a Rapid key number, you can write the name on the label above the appropriate Rapid key. 6 Note: You may need to add a pause between certain digits in the number to allow time for connection. For example, if you are on a PBX telephone system that requires an access number, such as "9", to be dialed to access an outside line, you will need to enter a pause between the access number and the fax number of the other party. Pauses are entered by pressing the REDIAL/PAUSE key (2 seconds per pause). If necessary, several pauses can be entered in a row. Use the following procedure to clear numbers: Step Press these keys Comments 1 FUNCTION DEF "ENTRY MODE" will appear in the display. 2 "FAX NUMBER MODE" will appear in the display. 3 ABC Select CLEAR. "FAX NUMBER CLEAR" will appear in the display. 4 To clear a Rapid key number, press the appropriate Rapid key. To clear a Speed Dial number, 01 enter the 2-digit number with the number keys. "PRESS ENTER KEY" will appear in the display. If there is no number stored under that Rapid key or Speed Dial number, "NO NUMBER STORED" (example) will appear in the display. 5 ENTER "CLEARED" will appear in the display. 6 STOP Step 4 or STOP . . . Return to Step 4 to clear another number, or press the STOP key a number of times until you exit. INITIAL SETTINGS 59 SUK 06 INITIAL LEO.p65 59 30/03/00, 17:01