Sharp AL-1200 AL-1041 AL-1200 Operation Manual - Page 15
Removing Protective, Packing Materials - fan
View all Sharp AL-1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
LOADING COPY PAPER 2 Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the arrow to remove it while pressing down the pressure plate of the paper tray. 2 Installation 3 Store the pressure plate lock which has been removed in step 2 and the screw which has been removed when unpacking (see page 11, step 2 of REMOVING PROTECTIVE PACKING MATERIALS) in the front of the paper tray. To store the pressure plate lock, rotate the lock to fix it on the relevant location. Pressure plate lock Screw 4 Adjust the paper guides on the paper tray to the copy paper width and length. Squeeze the lever of paper guide and slide the guide to match with the width of the paper. Move paper guide to the appropriate slot as marked on the tray. Paper guide B Paper guide A 5 Fan the copy paper and insert it into the tray. Make sure the edges go under the corner hooks. Do not load paper above the maximum height line ( will cause a paper misfeed. ). Exceeding the line 14