Sharp AL 1551CS AL-1651CS AL-1661CS Operation Manual - Page 33
Using the document glass
UPC - 074000074507
View all Sharp AL 1551CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
CONVENIENT COPY FUNCTIONS Using the document glass 1 Place the original that you wish to copy onto the front side of the paper on the document glass and close the RSPF. 2 Press the [2-SIDED COPY] key until "1 TO 2" appears, and then press the [ENTER] key. 2-SIDED COPY 1 TO 2 3 Press the [ ] key ( ) or [ ] key ( ) to select the binding edge and then press the [ENTER] key. Select "LONG EDGE" or "SHORT EDGE". The "LONG EDGE" and "SHORT EDGE" are shown in the illustration on the preceding page. BINDING EDGE LONG EDGE 4 Select the number of copies and any other settings, and then press the [START] key ( ). 4 The original for the front side is scanned into the memory. Note • If you need to clear the data scanned into memory, press the [CLEAR] key ( ). • If you wish to cancel two-sided copying and just make a copy of the first original, press the [ ] key. 5 When "[START] : NEXT SCAN [#] : START PRINT" appears, remove the first original and then place the original that you wish to copy onto the back side of the paper on the document glass. Close the RSPF. Place the second original in the same orientation as the first original. The first original The second original 2 1 6 Press the [START] key ( ). The copy will be delivered to the paper output tray. Note To cancel automatic two-sided copying, press the [CLEAR ALL] key ( ) or press the [2-SIDED COPY] key, select the "1 TO 1", and then press the [ENTER] key. 31