Sharp DX-C401FX DX-C311 DX-C401 Operation Manual - Page 112
MANUAL RATIO SELECTION Preset ratios/Zoom
View all Sharp DX-C401FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
COPIER MANUAL RATIO SELECTION (Preset ratios/Zoom) Touch the [Copy Ratio] key in the base screen of copy mode to select one of two preset enlargement ratios or three preset reduction ratios (maximum 200%, minimum 50%). In addition, the zoom keys can be used to select any ratio from 50% to 200% in increments of 1%. Copy Ratio OK 8½x11 5½x8½ 64% 8½x14 8½x11 77% 100 % Zoom 100% 129% 5½x8½ 8½x11 1 2 Auto Image XY Zoom (A) 1 Copy Ratio 50% 75% 80% 100 % 200% Zoom 150% 100% 175% Auto Image XY Zoom OK 2 2 Set the ratio. Touch a preset ratio key and/or the zoom keys to set the ratio. There are two setting screens. Use the keys to switch between the screens. ● 1st screen • Enlargement keys (1 ratio): 129% • Reduction keys (2 ratios): 64% and 77% • [100%] key ● 2nd screen • Enlargement keys (1 to 3 ratios) 200%, any ratio (max. of two) • Reduction keys (1 to 3 ratios) 50%, any ratio (max. of two) • [100%] key • (A) keys The keys marked (A) can be set to show any ratio using "Add or Change Extra Preset Ratios" in the system settings (administrator). • To quickly select a ratio, touch a reduction or enlargement key to select a ratio close to the desired ratio and then use the zoom keys for fine adjustment. • The zoom keys can be used to select any ratio from 50% to 200% in increments of 1%. Touch the key to increase the ratio, or the key to decrease the ratio. (If you continue to touch the / key, the ratio will change automatically. After 3 seconds, the ratio will change rapidly.) • As an alternative to touching the keys, you can also directly touch the numeric value display key and change the value with the numeric keys. • If the message "Image is larger than the copy paper." appears when an enlargement ratio is selected, the image may not fit on the paper. 2-26 Contents