Sharp LC-37SH20U LC-37SH20U Operation Manual - Page 27
Power Control, Digital Setup, Audio Setup, Basic adjustment settings
UPC - 074000363359
View all Sharp LC-37SH20U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Basic adjustment settings Power Control Power control setting allows you to save energy. No signal off When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes. 1 Press MENU and the MENU screen displays. 2 Press c/d to select "Power Control". 3 Press a/b to select "No Signal Off", and then press ENTER. 4 Press c/d to select "Enable", and then press ENTER. Digital Setup This setting allows you to optimize the settings of Digital broadcasting. Audio Setup You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected. 1 Press MENU and the MENU screen displays. 2 Press c/d to select "Digital Setup". 3 Press a/b to select "Audio Setup", and then press ENTER. Enable Disable 4 Press a/b to select "PCM" or "Dolby Digital", and then press ENTER. • Five minutes before the power shuts down, the remaining time displays every minute. 5 Press MENU to exit. PCM Dolby Digital NOTE • "Disable" is the factory preset value. • When a TV program finishes, this function may not operate. No operation off When set to "Enable", the power will automatically shut down if there is no operation for 3 hours. 1 Repeat steps 1 and 2 in No signal off. Selected item PCM Dolby Digital Description The optical output terminal outputs audio signal in PCM form. If your digital audio system does not support Dolby Digital, select "PCM". The optical output terminal outputs audio signal in Dolby Digital form. It reproduces sound from surround program of digital. 2 Press a/b to select "No Operation Off", and then press ENTER. 3 Press c/d to select "Enable", and then press ENTER. • Five minutes before the power shuts down, the remaining time displays every minute. 4 Press MENU to exit. 5 Press MENU to exit. NOTE • "Disable" is the factory preset value. 26