Sharp LC-52D62U LC-46D62U LC-52D62U Operation Manual - Page 33

Useful adjustment settings Input Label Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. Sleep Timer Allows you to set a time when the TV automatically switches to standby. 1 Press SLEEP. • The remaining time displays when the sleep timer has been set. Sleep Timer: Remaining 30 1 Press INPUT to select the desired input source. 2 Press MENU to display the MENU screen, and then press c/d to select "Setup". 3 Press a/b to select "Input Label", and then press ENTER. 2 Each time you press SLEEP, the remaining time switches as shown below. • When set, the time automatically starts counting down. • If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting. • Five minutes before the time expires, the remaining time displays every minute. Off 30 60 4 Press a/b/c/d to select the new name for the input mode, and then press ENTER. 120 90 Example INPUT SOURCE TV DVD NOTE • Select "Off" by pressing SLEEP to cancel the sleep timer. • The TV will enter the standby mode when the remaining time reaches zero. • When the sleep timer is set, its indicator on the TV lights red. INPUT2 INPUT3 INPUT4 INPUT5 5 Press MENU to exit. NOTE • You cannot change labels if the INPUT SOURCE is TV. 32