Sharp LC32D47U LC-32D47U Operation Manual - Page 19

On-Screen Display Menu Monochrome For viewing a video in monochrome. On: For viewing in monochrome. Off: Normal color. Range of OPC The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of +16 and a minimum of -16. Max.: -15 through +16 Min.: -16 through +15 Bass Enhancer This function allows you to enjoy bass-enhanced sound. On: Bass Enhancer function is on. Off: Normal sound. • Audio menu is grayed out when Output Select is set to "Variable". (See page 25.) Power Control Menu Power control setting allows you to save energy. Example Power Control • The maximum setting cannot be set to a smaller number than the minimum setting. • The minimum setting cannot be set to a bigger number than the maximum setting. • Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small. Audio Menu You can adjust the sound quality to your preference with the following settings. Example Audio Treble [ 0] a15 b15 Bass [ 0] a15 b15 Balance [ 0] L R Surround Bass Enhancer Reset Selected item Treble Bass Balance cbutton For weaker treble For weaker bass Decrease audio from the right speaker dbutton For stronger treble For stronger bass Decrease audio from the left speaker • Audio menu is grayed out when Output Select is set to "Variable". (See page 25.) • For resetting all Audio adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press a/b to select "Yes", and then press ENTER. Surround Surround function allows you to enjoy realistic "live" sound. On: Surround function is on. Off: Normal sound. Power Saving No Signal Off No Operation Off Power Saving This function allows you to automatically reduce the backlight brightness in order to decrease the power consumption and increase the backlight lifespan. Standard: Reduces the backlight brightness to 80%. When set to "Standard", " " appears on the screen. Advanced: Reduces the backlight brightness to 70%. When set to "Advanced", " screen. " appears on the Off: The backlight brightness is the same value of your settings in the selected AV MODE. • "Power Saving" does not function when you set "AV MODE" to "DYNAMIC (Fixed)". • When "OPC" is set to "On(Display)" or "On" while "Power Saving" is set to "Standard" or "Advanced", the Power Saving leaf icon appears to the left of "OPC" in the Picture menu screen. • When "OPC" is set to "Off" while "Power Saving" is set to "Standard" or "Advanced", the Power Saving leaf icon appears to the left of "Backlight" in the Picture menu screen. No Signal Off When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes. • When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute. • "Disable" is the factory preset value. • When a TV program finishes, this function may not operate. No Operation Off You can set the time length the TV takes to automatically shut the power down when there is no operation. 30min/3Hour/Disable • Audio menu is grayed out when Output Select is set to "Variable". (See page 25.) • For some discs, setup may be required on your DVD player. In this case, please refer to the operation manual of your DVD player. • When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute. • "Disable" is the factory preset value. 19