Sharp LC46BD80UN LC-46BD80UN Operation Manual - Page 36
Power Control Menu, Power Saving, Blu-ray disc Ecology, No Signal Off, No Operation Off
UPC - 074000371736
View all Sharp LC46BD80UN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
On-Screen Display Menu Power Control Menu Power control setting allows you to save energy. Example Power Control Power Saving [Off] Blu-ray disc Ecology [Enable] No Signal Off [Disable] No Operation Off [Disable] Blu-ray disc Ecology You can control the power on/off status of the Disc Drive when power to the TV is on. Enable: Power to Disc Drive is turned on when a disc is inserted or when the input source is switched to Bluray. Disable: Power to Disc Drive is turned on when TV power is turned on. No Signal Off When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes. 1 Press MENU to display the MENU screen, and then press c/d to select "Power Control". 2 Press a/b to select a specific adjustment item, and then press ENTER. 3 Press a/b (or c/d) to select the desired setting, and then press ENTER. 4 Press MENU to exit. Power Saving This function allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan. Standard: Optimizes power reduction based upon video content. When set to "Standard", " " appears on the screen. Advanced: Optimizes power reduction based upon video content and engages OPC. When set to "Advanced", " " appears on the screen. Off: This function does not work. • When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute. • "Disable" is the factory preset value. • When a TV program finishes, this function may not operate. No Operation Off When set to "Enable", the power will automatically shut down if there is no operation for 3 hours. • When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute. • "Disable" is the factory preset value. • "Power Saving" does not function when you set "AV MODE" to "DYNAMIC (Fixed)". • You cannot select a different Power Saving item for each AV MODE. When "Power Saving" is set, the "OPC" settings for all AV Modes will automatically change. -If you set "OPC" to "On" when "Power Saving" is set to "Standard", then the "Power Saving" setting will change to "Advanced". -When you change the "Power Saving" setting from "Advanced" to "Off" or to "Standard", "OPC" will be set to "Off". -"DYNAMIC (Fixed)" will remain set to "Off". • When "Power Saving" is set to "Standard" or "Advanced", the Power Saving leaf icon appears to the left of "OPC" in the Picture menu screen. • You can select Power Saving by pressing POWER SAVING on the remote control unit. (See page 18.) 34