Sharp LC52LE700UN Owners Manual for LC-52LE700UN - Page 46
Adjusting the PC Image, Setting Audio Input, PC Compatibility Chart
UPC - 074000372191
View all Sharp LC52LE700UN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Using a PC 1 Press MENU to display the MENU screen, and then press c/d to select the Setup or Option menu. • For adjusting "Auto Sync." or "Fine Sync.", select the Setup menu. • For setting "PC Audio Select", select the Option menu. 2 Press a/b to select a specific adjustment item, and then press ENTER to set each item. 3 Press a/b (or c/d) to select or adjust the desired setting, and then press ENTER. Adjusting the PC Image Auto Sync. (for Analog PC Input Mode Only) For automatically adjusting the PC image. Yes: Auto Sync. starts and "Now adjusting the image." displays. No: This function does not work. • When Auto Sync. is successful, "Completed" displays. If not, Auto Sync. failed. • Auto Sync. may fail even if "Completed" displays. • Auto Sync. may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing Auto Sync. • Be sure to connect the PC to the TV and switch it on before starting Auto Sync. Fine Sync. Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image. H-Pos.: Centers the image by moving it to the left or right. V-Pos.: Centers the image by moving it up or down. Clock: Adjust when the image flickers with vertical stripes. Phase: Adjust when characters have low contrast or when the image flickers. Setting Audio Input PC Audio Select Determines whether the AUDIO terminal is used for INPUT 4 (PC-IN) or INPUT 6 (HDMI). Input 4 (PC): Select this item when the audio signal is input via the INPUT 4 (PC-IN) terminal using an analog RGB cable. Input 6 (HDMI): Select this item when the audio signal is input via the INPUT 6 (HDMI) terminal using an HDMIDVI conversion cable. • When "PC Audio Select" is set to "Input 6 (HDMI)", sound will not be produced if you use only an HDMI-certified cable to connect HDMI-compatible equipment. To produce sound, you should make an analog audio connection. • If you want to connect HDMI-compatible equipment using only an HDMI-certified cable, set "PC Audio Select" to "Input 4 (PC)". PC Compatibility Chart It is necessary to set the PC correctly to display XGA and WXGA signal. Resolution Horizontal Vertical VESA Frequency Frequency Standard 720 x 400 31.5 kHz 70 Hz VGA 31.5 kHz 60 Hz 640 x 480 37.9 kHz 72 Hz O O 37.5 kHz 75 Hz O 35.1 kHz 56 Hz O SVGA 800 x 600 37.9 kHz 48.1 kHz 60 Hz 72 Hz O O 46.9 kHz 75 Hz O 48.4 kHz 60 Hz O XGA 1024 x 768 56.5 kHz 70 Hz O 60.0 kHz 75 Hz O WXGA 1360 x 768 47.7 kHz 60 Hz O SXGA 1280 x 1024 64.0 kHz 60 Hz O SXGA+ 1400 x 1050 65.3 kHz 60 Hz O UXGA 1600 x 1200 75.0 kHz 60 Hz O VGA and XGA are registered trademarks of International Business Machines Corp. • For resetting all Fine Sync. adjustment items to the factory preset values, press a/b to select "Reset", and then press ENTER. • It is not necessary to adjust the "Clock" or "Phase" when a digital signal is being input, so it cannot be selected. • The default cursor position may not be in the center, because the screen position variable ranges may be asymmetrical. • The screen position variable ranges depend on the View Mode or the signal type. The ranges can be seen on the position-setting screen. 44