Sharp MX-2300N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 818
staple case., Lower the staple case release lever
View all Sharp MX-2300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 818 highlights
Lower the staple case release lever and remove the staple case. 3 Pull the staple case out to the right. Raise the lever at the front end of the staple case and remove the jammed 4 staple. Remove the leading staple if it is bent. If bent staples remain, a staple jam will occur again. Lower the lever at the front end of the staple case. 5 Replace the staple case. Push the staple case in until it clicks into place. 6 Slide the finisher back to the right. Gently slide the finisher back to the right until it locks into its original position. 7 Close the cover. 8 43
43
3
Lower the staple case release lever and
remove the staple case.
Pull the staple case out to the right.
4
Raise the lever at the front end of the
staple case and remove the jammed
staple.
Remove the leading staple if it is bent. If bent staples remain, a
staple jam will occur again.
5
Lower the lever at the front end of the
staple case.
6
Replace the staple case.
Push the staple case in until it clicks into place.
7
Slide the finisher back to the right.
Gently slide the finisher back to the right until it locks into its
original position.
8
Close the cover.