Sharp MX 2700N MX2300N|MX2700N Operation Manual - Page 206

Press the [COLOR START] key ( ) or or the [BLACK & WHITE START] key ( ). Scanning begins. If group copy is selected, copying begins. 5 If you are using the sort function or other function that requires all originals to be scanned before the copies are printed, you must use the same [START] key that you used to scan the first original to scan each of the remaining originals. Even if a color mode is selected, copying will take place in black and white if the [BLACK & WHITE START] key ( ) is pressed. Remove the original and place the next original, and then press the [COLOR or START] key ( ) or the [BLACK & 6 WHITE START] key ( ). If you are using the sort function or other function that requires all originals to be scanned before the copies are printed, you must use the same [START] key that you used to scan the first original to scan each of the remaining originals. Repeat this step until all originals have been scanned. Place next original. Press [Start]. When finished, press [Read-End]. Touch the [Read-End] key. Read-End 7 To cancel scanning of the original and copying... Press the [STOP] key ( ). 14