Sharp MX-3640N Configuration Guide - Page 21

MX-6201N/MX-7001N Space Requirements and Planning Guide Maximum Width in Operation Installing Dealer: Plan ahead and make sure your installation is a great success! Remember to check the latest information on these products and make sure that the following items are available prior to installation. ❑ Verify power dedication and check for power stability. The MX-6201N/MX-7001N Document Systems require AC 120± 10% VAC, 60 HZ, 20 Amps power source. ❑ To confirm that you have the latest firmware available, go to www.sharp-service.com. A USB memory stick can be used to easily download the latest firmware updates to upgrade your Machine. ❑ Some accessories require a product key for operation. You should obtain the accessory Application Code, machine's serial number and register online prior to arrival at customer machine. ❑ Check to see if My Sharp online training is set up for the end-user. ❑ Make sure the customer has enough supplies on-hand to do a large job. After-hours printing and/or holiday work may take place immediately following an installation. MX-71NTBA MX-70NTCA MX-70NTMA MX-70NTYA MX-71NVBA MX-71NVSA MX-70NRBA MX-27NRSA Black Toner (requires 2 at start-up) Cyan Toner Magenta Toner Yellow Toner Black Developer Color Developer OPC Drum (black) OPC Drum (color - 3 required) All dimensions listed are approximate. Design and specifications subject to change without notice. Sharp, Sharp OSA, Sharpdesk, My Sharp and all related trademarks are trademarks or registered trademarks of Sharp Corporation and/or its affiliated companies. All other trademarks are the property of their respective owners. 1 Approximate Dimensions with Doors/Cover Open Overhead View MX-FNX3 2 Approximate Dimensions with Doors/Cover Open MX-FNX4 MX-PNX2B MX-CFX1 MX-LCX2 MX-LCX3 -or- RI