Sharp MX-4110N MX-4100N MX-4101N MX-5001N Operation Manual Suite - Page 694
PCL Settings
View all Sharp MX-4110N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 694 highlights
SYSTEM SETTINGS Item Selections Output • (Use Print per Unit) • (Do not use Print per Unit) • Staple Position*1: None, 1 Staple at Back, 2 Staples, 2 Staples (Top) • (Use Punch) • (Do not use Punch) Quick File • (Disabled) • (Enabled) *1 When a saddle stitch finisher or finisher is installed. *2 When a finisher (large stacker) is installed. *3 This setting is used to adjust the line width of vector graphics (black & white printing only). Except for CAD and other specialized uses, there is normally no need to change this setting. When "0" is selected, all lines are printed at a width of 1 dot. *4 Paper sizes that can be used with this function are A3, B4, A4, 11" x 17", 8-1/2" x 14", and 8-1/2" x 11". (This function may not take effect with some print methods.) *5 Only effective when printing PDF, JPEG, and TIFF files. PCL Settings This is used to set the symbol sets, fonts, and line feed code used in a PCL environment. Settings Item PCL Symbol Set Setting PCL Font Setting PCL Line Feed Code Wide A4 Description Specify the symbol set used for printing. Use this to select the font used for printing. This setting is used to select how the printer responds when a line feed command is received. When this is enabled, 80 characters per line can be printed on A4 size paper using a 10-pitch font. (When this setting is disabled, up to 78 characters can be printed per line.) Selections Select from 35 items. • Internal Font • Extended Font (List of internal fonts when extended fonts are not installed.) • 0.CR=CR; LF=LF; FF=FF • 1.CR=CR+LF; LF=LF;FF=FF • 2.CR=CR; LF=CR+LF; FF=CR+FF • 3.CR=CR+LF; LF=CR+LF; FF=CR+FF • (Enabled) • (Disabled) 7-22 Contents