Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 172

4 Select [SC2 TCP/IP Port] and then click the [New Port] button. In Windows 98/Me, select [Other], [SC2 TCP/IP Port], and then click the [OK] button. CHANGING THE PORT 5 Create the new port. • The "SC2 TCP/IP Port" is added when the printer driver is installed using a "Standard installation", or a "Custom installation" with "LPR Direct Print" selected. • If the printer driver is installed using a "Custom installation" with "IPP" selected, the [SC-Print2005 Port] is added. If you need to change the printer port when the machine is connected to an intranet or a wide area network (WAN) using the IPP function, select [SC-Print2005 Port], click the [New Port] button (the [OK] button in Windows 98/Me), and follow the on-screen instructions to create the port again. (1) (2) (3) (4) (1) Enter the machine's IP address. (2) Make sure that [LPR] is selected. (3) Make sure that [lp] is entered. (4) Click the [OK] button. 6 Click the [Close] button in the screen of step 4. In Windows 98/Me, this step is not required. Go to the next step. 7 Make sure the created printer port is selected in the printer properties window and then click the [Apply] button. CHECKING THE IP ADDRESS OF THE MACHINE You can check the IP address of the machine by printing out the "All Custom Setting List" in the system settings. Follow these steps to print out the "All Custom Setting List". Press the [SYSTEM SETTINGS] key, touch the [List Print (User)] key, and then touch the [All Custom Setting List] key. 43