Sharp PG M20X PG-M20X Operation Manual

Sharp PG M20X - Notevision XGA DLP Projector Manual

Get Sharp PG M20X - Notevision XGA DLP Projector PDF manuals and user guides
UPC - 074000358355
View all Sharp PG M20X manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PG M20X manual content summary:

  • Sharp PG M20X | PG-M20X Operation Manual - Page 1
    OPERATION MANUAL MODEL PG-M20X DIGITAL MULTIMEDIA PROJECTOR Introduction Setup and Connections Basic Operation Easy to Use Functions Appendix
  • Sharp PG M20X | PG-M20X Operation Manual - Page 2
    Number located on the bottom of the projector and retain this information. Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of "Supplied accessories" on page 14. Model No.: PG-M20X Serial No.: This equipment complies with
  • Sharp PG M20X | PG-M20X Operation Manual - Page 3
    USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in
  • Sharp PG M20X | PG-M20X Operation Manual - Page 4
    , Dutch, Portuguese, Chinese (Traditional Chinese and Simplified Chinese), Korean and Arabic. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Schwedisch, Spanisch, Italienisch
  • Sharp PG M20X | PG-M20X Operation Manual - Page 5
    operation manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service
  • Sharp PG M20X | PG-M20X Operation Manual - Page 6
    REPLACING THE LAMP. REPLACE WITH SAME SHARP LAMP UNIT TYPE BQC-PGM20X//1 ONLY. UV RADIATION : CAN CAUSE EYE DAMAGE. TURN OFF LAMP BEFORE SERVICING. MEDIUM PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL HAZARD OF GLASS PARTICLES IF LAMP HAS RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL. PRECAUTIONS
  • Sharp PG M20X | PG-M20X Operation Manual - Page 7
    chip eliminates Color Break- ing phenomena common with previous generation DLP™ projectors. • Newly developed 12° DMD™ chip provides significantly improved color gradation by minimizing hue change. • Color Management Function Supports sRGB (color management). • Noise Reduction Allows for a clear
  • Sharp PG M20X | PG-M20X Operation Manual - Page 8
    3 Contents 4 IMPORTANT SAFEGUARDS 6 How to Access the PDF Operation Manuals ..... 9 Part Names 10 Projector (Front and Top View 10 Projector (Side View 11 Remote Control 12 Using the Remote Control 13 Available Range of the Remote Control 13 Inserting the Batteries 13 Accessories 14 Setup
  • Sharp PG M20X | PG-M20X Operation Manual - Page 9
    Indicators 70 Regarding the Lamp 71 Lamp 71 Caution Concerning the Lamp 71 Replacing the Lamp 71 Removing and Installing the Lamp Unit 72 Resetting the Lamp Timer 73 Connecting Pin Assignments 74 Computer Compatibility Chart 75 Troubleshooting 76 For SHARP Assistance 78 Specifications 79
  • Sharp PG M20X | PG-M20X Operation Manual - Page 10
    the following basic rules for its installation, use and servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All
  • Sharp PG M20X | PG-M20X Operation Manual - Page 11
    instructions. Adjust only those controls that are covered by the operating instructions service. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement SHARP 2), which Lineo supports.You may obtain LINEO, Inc. • DLP™ (Digital Light Processing)
  • Sharp PG M20X | PG-M20X Operation Manual - Page 12
    unit I Potential hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for a replacement. See "Replacing the Lamp" on page 71. CAUTION PRECAUCI N PR CAUTION BQC-PGM20X//1 Cautions concerning the setup of the
  • Sharp PG M20X | PG-M20X Operation Manual - Page 13
    " folder. 6 Double click on the desired installation program and follow the instructions on the screen. For Macintosh: 1 Insert the CD-ROM in the CD on the "CD-ROM" drive. 4 Double click on the "manuals" folder. 5 Double click on the "pgm20x" folder. 6 Double click on the language (name of the
  • Sharp PG M20X | PG-M20X Operation Manual - Page 14
    LAMP REPLACEMENT 70 indicator Illuminates in green normally. Replace the lamp when the indicator illuminates in red. POWER indicator 28 Illuminates in red, when the projector ring Foot releases/Adjustment feet For adjusting the projector's height. 16 Attaching the terminal cover Attach the terminal
  • Sharp PG M20X | PG-M20X Operation Manual - Page 15
    Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector. Attaching the lens cap After putting the lens cap strap on the lens cap, pass the other end of the strap
  • Sharp PG M20X | PG-M20X Operation Manual - Page 16
    Part Names (cont.) Remote Control Remote control signal transmitter FORWARD/BACK button 26 Moves forward or backwards when connected to a computer using a USB cable. Same as the [Page Down] and [Page
  • Sharp PG M20X | PG-M20X Operation Manual - Page 17
    wipe them and then remove them using a cloth. • The batteries included with this projector may be used up over a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries. • Remove the batteries from the remote control if you will not be using the
  • Sharp PG M20X | PG-M20X Operation Manual - Page 18
    Accessories Supplied accessories Remote control RRMCGA013WJSA Two R-03 batteries ("AAA" size, attached) GCOVD0103CESA CD-ROM UDSKA0058CEN2 Operation manual (this manual) Quick reference guides Optional accessories DVI cable (9'10'' Sharp Authorized Projector Dealer or Service Center. -14
  • Sharp PG M20X | PG-M20X Operation Manual - Page 19
    Setup and Connections Setup and Connections
  • Sharp PG M20X | PG-M20X Operation Manual - Page 20
    position. Info • Do not press the foot releases when the feet are extended without firmly holding the projector. • Do not hold the lens when lifting or lowering the projector. • When lowering the projector, be careful not to get your fingers caught in the area between the adjustment feet and the
  • Sharp PG M20X | PG-M20X Operation Manual - Page 21
    screen to the projec- tor may vary depending on the size of the screen. P.18 • The default setting can be used, when plac- ing the projector in front of the screen. If the Audience projected image is reversed or inverted, re- adjust the setting to "Front" in "PRJ Mode". P.60 • Place
  • Sharp PG M20X | PG-M20X Operation Manual - Page 22
    Setup (cont.) Screen Size and Projection Distance Screen Base line: Horizontal line passing through the lens center. Lens center 90° H L:Projection distance NORMAL Mode (4:3) Picture (Screen) size Projection distance (L) Diag. (X) Width Height Maximum (L1) Minimum (L2) 300" (762 cm) 240
  • Sharp PG M20X | PG-M20X Operation Manual - Page 23
    . Ceiling-mount setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately.) (ANPGCM90
  • Sharp PG M20X | PG-M20X Operation Manual - Page 24
    is the last device to be turned on after all the connections are made. • Be sure to read the operation manuals of the devices to be connected before making connections. This projector can be connected to: A computer using: I A DVI to 15-pin D-sub cable (See page 21.) I A DVI cable (type AN-C3DV
  • Sharp PG M20X | PG-M20X Operation Manual - Page 25
    "Picture" menu. See page 40. • A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Sharp Authorized Projector Dealer or Service Center. Supplied accessory DVI to 15-pin D-sub cable To RGB Output port To Audio Output port Notebook computer 2 ø3.5 mm
  • Sharp PG M20X | PG-M20X Operation Manual - Page 26
    to the computer using the DVI cable. 2 To input audio signal, connect the projector to the computer using a ø3.5 mm stereo audio cable (commercially available or available as Sharp service part QCNW-4870CEZZ). Note • This DVI port is DVI version 1.0 compat- ible. Therefore when the signal is
  • Sharp PG M20X | PG-M20X Operation Manual - Page 27
    Use the above cables to con- nect the projector and the video equipment. 3 Connect the projector and the video equipment using an audio cable (commercially available). Type: AN-C3CP (9'10" (3.0 m)) DVI to 15-pin D-sub adaptor Model: AN-A1DV (7.9" (20 cm)) To analog component output terminal To audio
  • Sharp PG M20X | PG-M20X Operation Manual - Page 28
    a higher-quality image. For realizing a higher-quality image, use a commercially available S-VIDEO cable to connect the S-VIDEO terminal on the projector and the S-VIDEO output terminal on the video equipment. • A ø3.5 mm minijack to RCA audio cable (commercially available) is recommended for
  • Sharp PG M20X | PG-M20X Operation Manual - Page 29
    an RGB monitor loop-out adaptor and an RGB cable. 1 Connect the projector to the computer and monitor using an RGB monitor loop-out adaptor (sold Using INPUT 1 Terminal with the Terminal Cover Attached to the Projector The INPUT 1 terminal can be used with the terminal cover folded as shown in the
  • Sharp PG M20X | PG-M20X Operation Manual - Page 30
    Using the Wireless Presentation Function of the Remote Control The Wireless Presentation function on the projector works the same as the [Page Up function does not work with the following operating systems that do not support USB. • Versions earlier than Windows 95. • Versions earlier than Windows
  • Sharp PG M20X | PG-M20X Operation Manual - Page 31
    Basic Operation Basic Operation
  • Sharp PG M20X | PG-M20X Operation Manual - Page 32
    enters standby mode. 2 Press on the projector or on the remote control. • The POWER indicator illuminates in green. After the LAMP REPLACEMENT indicator illuminates, the projector is ready to start operation. Note • The LAMP REPLACEMENT indicator illuminates, indicating the status of the
  • Sharp PG M20X | PG-M20X Operation Manual - Page 33
    3 Press , or on the remote control to select the INPUT Mode. • Pressing on the projector switches the inputs in the following order: ¡ INPUT 1 ¡ INPUT 2 ¡ INPUT 3 Note • When no signal is received, "NO SIGNAL" will be displayed. When a signal that the projector is not preset to receive is
  • Sharp PG M20X | PG-M20X Operation Manual - Page 34
    again will turn the pic- ture and the sound back on. 6 Press , then press again while the confirmation message is displayed, to turn off the projector. Note • If you accidentally pressed and do not want to turn off the power, wait until the confirmation message disappears. Info • Do not unplug the
  • Sharp PG M20X | PG-M20X Operation Manual - Page 35
    on-screen display. Adjusting the Lens The image is focused and adjusted to the desired size using the focus ring or zoom knob on the projector. 1 The focus is adjusted by rotat- ing the focus ring. Zoom knob Focus ring Basic Operation 2 Zooming is adjusted by mov- ing the zoom knob
  • Sharp PG M20X | PG-M20X Operation Manual - Page 36
    Correcting the Trapezoidal Distortion (Keystone Correction) Correcting the Trapezoidal Distortion This function allows for Keystone (On-screen Trapezoidal Distortion) Correction. Note • Keystone Correction is the correction for trapezoidal distortion that occurs when the image is positioned away
  • Sharp PG M20X | PG-M20X Operation Manual - Page 37
    new digital television system in the United States. Press to move the projected image upwards. Press to reset the image. UNDO button Press to move the projected image downwards. Press to reset the image. • The Digital Shift function works with BORDER, STRETCH or SMART STRETCH screen. For details
  • Sharp PG M20X | PG-M20X Operation Manual - Page 38
    list shows the items that can be set in the projector. I INPUT 1 Mode Main menu Picture Page 40 Sub menu Contrast -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Sharp -30 +30 Red -30 +30 Blue -30 +30 CLR Temp -3 +3 Reset Signal Type Progressive Mode Fine Sync Page 42 Clock
  • Sharp PG M20X | PG-M20X Operation Manual - Page 39
    PAL (50/60Hz) SECAM NTSC4.43 NTSC3.58 PAL-M PAL-N Sharp Custom Blue None Sharp Custom None Main menu Options (2) Page 58 Sub menu Lamp Timer Break Timer PRJ Mode Language Page 31 Keylock Level Password Anti-Theft All Reset English Deutsch Español Nederlands Français Italiano Svenska Portugu
  • Sharp PG M20X | PG-M20X Operation Manual - Page 40
    has two sets of menu screens that allow you to adjust the image and various projector settings. You can operate the menus from the projector or remote control using the following proce- dure. On-screen menu for INPUT 2 On-screen menu for INPUT 1 RGB mode or INPUT 3 Mode Menu Bar (Main
  • Sharp PG M20X | PG-M20X Operation Manual - Page 41
    Basic Operation 2 Press or to select the menu you want to adjust. Note • For details on the menus, see the tree charts on pages 34 and 35. 3 Press or to select the item you want to adjust. Note • To display a single adjustment item, press after selecting the item. Only the menu bar and the selected
  • Sharp PG M20X | PG-M20X Operation Manual - Page 42
    Using the Menu Screen (cont.) Basic Operations (Settings) 1 Press . Note • The "Picture" menu screen for the selected input mode is displayed. • The on-screen display shown on the right is displayed when the INPUT 1 mode is selected. 2 Press or to select the menu you want to adjust. Note • For
  • Sharp PG M20X | PG-M20X Operation Manual - Page 43
    4 Press . • The cursor shifts to the sub menu. 5 Press or to select the setting of the item displayed in the sub menu. 6 Press . • The item selected is set. Note • Some adjustment items will display a confirmation message. When setting an item, press or to select "Yes" or "OK" and then press . 7
  • Sharp PG M20X | PG-M20X Operation Manual - Page 44
    projector's picture to your preferences with the following picture settings. Selected Item Description button button Contrast Bright Color Tint Sharp Component, "Sharp" can be adjusted when 480I, 480P, 720P or 1080I signals are entered. • To reset all adjustment items, select "Reset" and press
  • Sharp PG M20X | PG-M20X Operation Manual - Page 45
    SECAM) enhancement to progressive mode images. * The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM
  • Sharp PG M20X | PG-M20X Operation Manual - Page 46
    For adjustments, see page 36. Note • Computer image adjustments can be made easily by pressing . See page 44 for details. Saving Adjustment Settings This projector allows you to store up to seven adjustment settings for use with various computers. Select "Save Setting" in the "Fine Sync" menu ➝ For
  • Sharp PG M20X | PG-M20X Operation Manual - Page 47
    not been set, a resolution and frequency setting will not be displayed. • When selecting a stored adjustment setting with "Select Setting", you can set the projector in the stored adjustments. Special Mode Settings Ordinarily, the type of input signal is detected and the correct resolution mode is
  • Sharp PG M20X | PG-M20X Operation Manual - Page 48
    38. Note When setting to " Normal" or " High Speed": • Auto Sync adjustment will occur when the projector is turned on or when the inputs are switched, when connected to a computer. Manual adjustments should be performed: • When the optimum image cannot be achieved with Auto Sync adjustment. See
  • Sharp PG M20X | PG-M20X Operation Manual - Page 49
    Easy to Use Functions Easy to Use Functions
  • Sharp PG M20X | PG-M20X Operation Manual - Page 50
    Selecting the Picture Display Mode This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose "NORMAL", "FULL", "DOT BY DOT", "BORDER", "STRETCH" or "SMART STRETCH" image. Switching the Picture Display Using
  • Sharp PG M20X | PG-M20X Operation Manual - Page 51
    COMPUTER 4:3 aspect ratio Other aspect ratios SVGA (800 × 600) XGA (1024 × 768) SXGA (1280 × 960) UXGA (1600 × 1200) SXGA (1280 × 1024) NORMAL 1024 × 768 1024 × 768 1024 × 768 1024 × 768 960 × 768 FULL - - - - 1024 × 768 DOT BY DOT 800 × 600 - 1280 × 960 1600 × 1200 1280 × 1024 • "NORMAL" is
  • Sharp PG M20X | PG-M20X Operation Manual - Page 52
    Displaying a Still Image This function allows you to instantly freeze a moving image. This is useful when you want to display a still image from a computer or video, giving you more time to explain the image to the audience. Storing an Image in Still Image Format 1 Press . • The projected image is
  • Sharp PG M20X | PG-M20X Operation Manual - Page 53
    Enlarging a Specific Portion of an Image This function allows you to enlarge a specific portion of an image. This is useful when you want to display a detailed portion of the image. Displaying an Enlarged Portion of an Image 1 Press . • Enlarges the image. • Pressing or enlarges or re- duces the
  • Sharp PG M20X | PG-M20X Operation Manual - Page 54
    Gamma Correction Function Gamma is an image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the brightness of the brighter portions. When you are displaying images with frequent dark scenes, such as a film or concert, or when
  • Sharp PG M20X | PG-M20X Operation Manual - Page 55
    the "Options (1)" menu ➝ For displaying, see page 36. 1 Press • Select to select . to clear the Pict in Pict mode. 2 Press or on the remote control or on the projector to switch the image in the inset picture. 3 Press , , or to set the position of the inset picture. • Press to stop the frame
  • Sharp PG M20X | PG-M20X Operation Manual - Page 56
    . Note • "Power Save" mode is factory preset to "OFF". Automatic Power Shutoff Function When no input signal is detected for more than 15 minutes, the projector will automatically shut off if set to " (On)". The Auto Power Off function will be disabled when it has been set to " (Off)". Select"Auto
  • Sharp PG M20X | PG-M20X Operation Manual - Page 57
    signals are being received, when turning on the projector or pressing on the projector. • OFF For switching input modes manually in order by pressing on the projector. • To stop searching for the input mode, press on the projector, or , or on the remote control. Info • Even while this function is
  • Sharp PG M20X | PG-M20X Operation Manual - Page 58
    . All On-screen Displays are not displayed. (except Menu, On-screen displays displayed when the LENS button is pressed and warning displays (Power off/Temp./Lamp, etc.)) Turning Off the On-screen Display Select "OSD Display" in the "Options (1)" menu ➝ For settings, see page 38. 54 -54
  • Sharp PG M20X | PG-M20X Operation Manual - Page 59
    Setting the Video Signal The video input system mode is preset to "Auto"; however, a clear picture from the connected audio-visual equipment may not be received, depending on the video signal difference. In that case, switch the video signal. Setting the Video Signal Select "Video System" in the "
  • Sharp PG M20X | PG-M20X Operation Manual - Page 60
    Saving Projected Images • This projector allows you to capture projected images (RGB signals) and set them as a startup image, or background image when no signals are being received. • You can
  • Sharp PG M20X | PG-M20X Operation Manual - Page 61
    Image This function allows you to select the image displayed when no signal is being sent to the projector. Selected Item Description Sharp SHARP default image Custom *1 User customized image (i.e. company logo) Blue Blue screen None Black screen *2 *1 You can set a captured image as
  • Sharp PG M20X | PG-M20X Operation Manual - Page 62
    allows you to check the lamp usage time. Select "Options (2)" menu to see the lamp usage time. Note • It is recommended that the lamp be changed after approximately 1,900 cumulative hours of use. For lamp replacement, contact your nearest Sharp Authorized Projector Dealer or Service Center. 58 -58
  • Sharp PG M20X | PG-M20X Operation Manual - Page 63
    be temporarily dis- abled during the Break Timer. If no signal transmission occurs for more than 15 minutes after the Break Timer has completed, the projector will turn off. • The Break Timer will be displayed on the startup image. To change the screen displayed during the Break Timer, change the
  • Sharp PG M20X | PG-M20X Operation Manual - Page 64
    Level Normal Level A Level B Description All operation buttons are functional. Only INPUT/VOLUME/AV MUTE buttons on the projector are available. All operation buttons on the projector are unavailable. Setting up the Keylock Select "Keylock Level" in the "Options (2)" menu ➝ For settings, see page
  • Sharp PG M20X | PG-M20X Operation Manual - Page 65
    be necessary before changing the Keylock Level. Setting up a Password A password can be set by the user to prevent adjustments to certain settings on the "Options (2)" menu. Using a password together with the password to change "PRJ Mode", "Keylock Level", "AntiTheft" and "All Reset" settings. -61
  • Sharp PG M20X | PG-M20X Operation Manual - Page 66
    theft-deterrent function is activated, users will need to enter the correct keycode each time the projector is started. Failure to enter you like on the remote control or projector to set the first digit in "New Code". Note • The following buttons on the remote control and projector cannot be set as
  • Sharp PG M20X | PG-M20X Operation Manual - Page 67
    users will have access. If you lose or forget your keycode, you will need to contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 78). You may need to bring your projector to them to restore the projector to original factory condition (password and keycode reset
  • Sharp PG M20X | PG-M20X Operation Manual - Page 68
    have made in the projector. Returning to the Default Settings Select "All Reset" in the "Options (2)" menu ➝ For resetting, see page 36. displayed when selecting "All Reset". The following items cannot be initialized. • Fine Sync • Special Modes • Signal Info • Options • Lamp Timer • Anti-Theft •
  • Sharp PG M20X | PG-M20X Operation Manual - Page 69
    Displaying the Adjustment Settings This function can be used to display all the adjusted settings as a list on the screen. Checking the Adjustment Settings on a List Select the "Status" menu and press ➝ For details, see page 36. -66
  • Sharp PG M20X | PG-M20X Operation Manual - Page 70
    Appendix Appendix
  • Sharp PG M20X | PG-M20X Operation Manual - Page 71
    of the arrows. 3 Reinsert the inner padding into the carrying case. Info • Be sure to insert the inner padding to protect the lens and the projector. 4 Place the projector and the ac- cessories in the carrying case. Info • Be sure to attach the lens cap to protect the lens. • Be sure the
  • Sharp PG M20X | PG-M20X Operation Manual - Page 72
    a soft flannel cloth. Cleaning the exhaust and intake vents I Use a vacuum cleaner to clean dust from the exhaust vent and the intake vent. Projector's Rear View Neutral detergent diluted with water I When the dirt is hard to remove, soak a cloth in a neutral detergent diluted with water, wring
  • Sharp PG M20X | PG-M20X Operation Manual - Page 73
    usage time exceeded 1,900 hours • Burnt-out lamp • Lamp circuit failure • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 78) for repair or lamp replacement. • Please exercise care when replacing the lamp. Info • If the TEMPERATURE WARNING indicator
  • Sharp PG M20X | PG-M20X Operation Manual - Page 74
    replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center for repair. Purchase a replacement lamp unit of type BQCPGM20X//1 from your nearest Sharp Authorized Projector Dealer or Service Center. Then carefully change the lamp by following the instructions
  • Sharp PG M20X | PG-M20X Operation Manual - Page 75
    cooling fan stops. Lamp unit BQC-PGM20X//1 POWER button 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Turn over the projector, and loosen the user service screw that secures
  • Sharp PG M20X | PG-M20X Operation Manual - Page 76
    , , and on the projector, press on the projector. • "LAMP 0000H" is displayed, indicating that the lamp timer is reset. Info • Make sure to reset the lamp timer only when replacing the lamp. Otherwise, this may cause the lamp to become damaged or explode. User service screw AC socket POWER button
  • Sharp PG M20X | PG-M20X Operation Manual - Page 77
    Connecting Pin Assignments DVI Digital / Analog INPUT 1 port : 29 pin connector 9 ~ 16 1 2 7 8 17 24 18 23 • DVI Digital INPUT Pin No. Signal Pin No. Signal 1 T.M.D.S data 2- 16 Hot plug detection 2 T.M.D.S data 2+ 17 T.M.D.S data 0- 3 T.M.D.S data 2 shield 18 T.M.D.S data 0+ 4 Not
  • Sharp PG M20X | PG-M20X Operation Manual - Page 78
    a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/ MAC/ WS how to change display modes can be found in your notebook computer's operation manual. • When this projector receives 640 × 350 VESA format VGA signals, "640 × 400" appears
  • Sharp PG M20X | PG-M20X Operation Manual - Page 79
    Troubleshooting Problem No picture and no sound Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to side panel of the projector. • Remote control batteries have run
  • Sharp PG M20X | PG-M20X Operation Manual - Page 80
    projector do not work Check • The Keylock level is set. If the Keylock level is set to Level B, all the buttons are locked. If the Keylock level is set to Level A, only the INPUT, VOLUME and AV MUTE buttons work. • Change the input signal type setting. • The LAMP REPLACEMENT on the remote control) •
  • Sharp PG M20X | PG-M20X Operation Manual - Page 81
    Assistance If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 76 and 77. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Canada Mexico Germany
  • Sharp PG M20X | PG-M20X Operation Manual - Page 82
    Projector Model PG-M20X manual, Quick reference guides Replacement parts Lamp unit (Lamp/cage module) (BQC-PGM20X//1), Remote manual (TINS-7609CEN1), Quick reference guides * Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated. This SHARP projector
  • Sharp PG M20X | PG-M20X Operation Manual - Page 83
    Dimensions Units: inches (mm) Side View Rear View Top View Side View 12 9/16 (318.3) 11 15/16 (302.5) Front View 1 3/8 (34.2) 8 3/4 (223) 8 5/8 (219) 5 1/16 (128) 4 9/16 (115.5) 2 3/16 (55.5) 7 11/16 (195) 3 1/4 (82.5) 2 3/8 (60) 1 1/2 3 3 1/4 (38.7) (76.1) (82.9) 3 1/8 (80) 5/16 (7.5)
  • Sharp PG M20X | PG-M20X Operation Manual - Page 84
    ) Display digital interface that also supports Analog interfaces. Freeze Temporarily freezes by the IEC, the color changes according to DLP features, so that the images are displayed in mode. Startup Image The image displayed when the projector is turned on. Status function Displays the settings
  • Sharp PG M20X | PG-M20X Operation Manual - Page 85
    AC socket 20 Adjustment buttons 36 Adjustment feet 16 All Reset 65 Anti-Theft 63 Aspect ratio 47 Auto Power Off PRJ mode 60 Progressive Mode 41 Remote control 12 Remote control sensor 13 Remote control signal transmitter 12 Replacing the lamp 71 RESIZE button 46 Reversing/Inverting
  • Sharp PG M20X | PG-M20X Operation Manual - Page 86
    SHARP CORPORATION
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
DIGITAL MULTIMEDIA
PROJECTOR
MODEL
PG-M20X
OPERATION MANUAL
Introduction
Setup and Connections
Basic Operation
Easy to Use Functions
Appendix