Sharp PN-465U PN-465U Operation Manual - Page 36

Specifications Product Specifications Model LCD element Max. resolution Max. colors (pixels) PN-465U 46" wide (116.8 cm diagonal) ASV low-reflection black TFT LCD 1920 x 1080 16.77 M colors (8 bits/color) Pixel pitch 0.53025 mm (H) x 0.53025 mm (V) Viewing angle 176° right/left/up/down (contrast ratio ≥ 10) Screen active area inch (mm) 40-1/16 x 22-9/16 (1018.1 x 572.7) Computer input signal Sync signal Digital (DVI 1.0 standard-compliant), Analog RGB (0.7Vp-p) [75 Ω] Horizontal/vertical separate (TTL: positive/negative), Sync-on-green, Composite sync (TTL: positive/negative) Video color system NTSC (3.58 MHz) Plug and play VESA DDC2B Power management VESA DPMS, DVI DMPM Input terminals PC/AV Digital PC Analog DVI-D 24 pin (HDCP compatible) x 1 Mini D-sub 15 pin, 3 rows x 1, BNC *1*2 x 1 Audio 3.5 mm mini stereo jack x 1 AV Composite video BNC x 1 Component BNC (Y, Cb/Pb, Cr/Pr)*1 x 1 Output terminals Power requirement Operating temperature Operating humidity Power consumption Dimensions inch (mm) Weight lbs. (kg) Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 PC/AV Digital DVI-D 24 pin x 1 *3 Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 Speaker 7 W + 7 W [6 Ω] AC 120 V, 60 Hz 32°F to 104°F (0°C to 40°C) 20% to 80% (no condensation) 266 W (Input signal waiting mode: 6.5 W, Standby mode: 3.5 W) Approx. 43-13/16 x 5-1/2 x 25-7/8 (1,113 x 140 x 657) (excluding protrusions) Approx. 78.3 (35.5) (excluding the temporary stand) *1 Cannot be used simultaneously. *2 Does not support plug and play. *3 Connection is allowed with an HDCP-compatible device only. Does not support Repeater control function. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. E 34