Sharp PN-E471 PN-TPC1 Signage Controller User Guide
Sharp PN-E471 Manual
UPC - 074000046955
View all Sharp PN-E471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PN-E471 manual content summary:
- Sharp PN-E471 | PN-TPC1 Signage Controller User Guide - Page 1
PN-TPC1 Users Guide© Version - 1.e - Sharp PN-E471 | PN-TPC1 Signage Controller User Guide - Page 2
outputs including HDMI®, DVI, and VGA. The unit also includes an RS232 port for display control and a custom mounting bracket specially designed to attach behind a Sharp PN-E™ series professional monitor. The PN-TPC1's all metal chassis and small form factor make it ideal for commercial applications - Sharp PN-E471 | PN-TPC1 Signage Controller User Guide - Page 3
and used in accordance with instructions contained in this manual, may cause harmful interference by turning the equipment off and on, the user is encouraged to try to correct the interference by SEPARATION BETWEEN THE EQUIPMENT AND THE RECEIVER - CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT - Sharp PN-E471 | PN-TPC1 Signage Controller User Guide - Page 4
Specifications Specifications Chipset o NVIDIA® MCP7A-ION™ Series Size o Mini-ITX form factor o Case: 7.5" x 7.4" x 1.75" Microprocessor support o Intel® ATOM™ N330 1.6 GHz CPU (onboard) o Support for 533 MT/s (533MHz FSB) Operating systems: o Supports Windows® XP 32bit/64bit and Windows - Sharp PN-E471 | PN-TPC1 Signage Controller User Guide - Page 5
Specifications Specifications (con't) Green Function o Supports ACPI (Advanced Configuration and Power Interface) o RTC timer to power-on the system o AC power failure recovery Onboard Graphics support o Integrated 300MHz DAC for analog displays with resolutions up to 1920x1440 at 75Hz. o - Sharp PN-E471 | PN-TPC1 Signage Controller User Guide - Page 6
Installation Mounting PN-TPC1 on Sharp PN-series Displays 1. Before beginning Make sure to turn off the monitor and remove the AC power. 2. Items needed Sharp PN series Professional Monitor PN-TPC1 Mounting Plate AC Power Adapter 4 x M4 (0.7x10mm) screws 2 x M3 (0.5x5 mm) Philips Screw Driver 3. - Sharp PN-E471 | PN-TPC1 Signage Controller User Guide - Page 7
as in Figure 4, there are two small slits near the edges on the PN-TPC1 and two small fingers on either side of AC power adapter holder on the mounting plate. As you slide the PN-TPC1 into the mounting plate, insert the two fingers into these slits as in Figure 5. There are two - Sharp PN-E471 | PN-TPC1 Signage Controller User Guide - Page 8
Connector 7. Audio Port 2-Channel 4-Channel 6-Channe Blue Line-In Rear Speaker Out Rear Speaker Out Green Line-Out Front Speaker Out Front Speaker Out Pink Mic In Mic In Center/Subwoofer 8. LAN Connector (with LED status indicator) Yellow/Light Up/Blink = 10 Mbps/Link/Activity Yellow - Sharp PN-E471 | PN-TPC1 Signage Controller User Guide - Page 9
's power input jack (as in the figure 2). 11. Power Button This button will stay lit if the PN-TPC1 is powered on. If the PN-TPC1 doesn't power up after the AC is connected, then press this button to power up. If normal Windows shutdown is not shutting down the PNTPC1, then press - Sharp PN-E471 | PN-TPC1 Signage Controller User Guide - Page 10
Installation PCB Version - Sharp PN-E471 | PN-TPC1 Signage Controller User Guide - Page 11
Support . If the unit is in warranty, please contact Sharp Customer Service. 2. Items needed Recovery DVD the PC. Follow instructions and install Windows OS. Remove the recovery DVD and reboot. 4. Install System Drivers from Recovery DVD Insert instructions from the included SDSS operating manual. - Sharp PN-E471 | PN-TPC1 Signage Controller User Guide - Page 12
Support Support & RMA Warranty service is available from a Sharp® Authorized Service Center located in the United States. To receive repair handling instructions and to find the location of the nearest Sharp Authorized Service Center, please call Sharp toll free at 1-800-BE-SHARP (1-800-237-4277). - Sharp PN-E471 | PN-TPC1 Signage Controller User Guide - Page 13
End
PN-TPC1
Users Guide
©
Version
–
1.e