Sharp PN-L802B PN-L802B Quick Start Guide - Page 10

Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 6 people. • Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation. This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. Install by the most suitable method for the material and the structure. • To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the thickness of the mounting bracket. • After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount. • Do not use any screw holes other than VESA holes for installation. nRemoving the temporary stand Caution • The temporary stand is only for use with this monitor. Do not use it for any other devices. nAttaching the Tray 1. Remove the cover from the back of the monitor. 1. Spread a soft thick cloth (such as a blanket) on a stable level surface on which the entire monitor can be placed, and place the monitor on it with the screen facing down. 2. Remove the stand fixing screws and then remove the stand. 2. Secure the tray mounting bracket. Secure using 2 tray mounting screws (M5 long) (supplied) and 1 tray mounting screw (M5 short) (supplied). 3. Attach the cover (supplied) onto the back of the monitor. Secure using 2 cover screws (M4 with washers) (supplied). (2) (3) Cover Cover screws (M4 with washers) (supplied) Cover screws (M4 with washers) (supplied) If a tray will not be attached, affix the cover seal (supplied) to the cover. (1) Tray mounting bracket (supplied) Tray mounting screws (M5 long) (supplied) Tray mounting screw (M5 short) (supplied) 3. Attach the cover onto the back of the monitor and secure the tray. Insert the tray into the tray mounting bracket and secure with 2 M4 tray mounting screws (supplied). E8 Screw removed in step 1 Tray (supplied) Screw removed in step 1 M4 tray mounting screws (supplied)