Sharp R-402JK R-402JK/JW Microwave Operation Manual - Page 11

BEFORE OPERATING • Before operating your new microwave oven make sure you read and understand this operation manual completely. • Before the oven can be used, follow these procedures: 1. Plug in the oven. The oven display will then begin flashing 8 8 : 8 8 . 2. Touch the STOP/CLEAR pad. : will appear. 3. Set clock. TO SET THE CLOCK • Suppose you want to enter the correct time of day 12:30 (A.M. or P.M.). PROCEDURE DISPLAY TIMER 1 CLOCK :0 Touch TIMER/CLOCK pad. The colon (:) will flash. 2 1230 Enter the correct time of day by touching the numbers in sequence. TIMER 3 CLOCK Touch TIMER/CLOCK pad again. 12:30 12:30 STOP/CLEAR Touch the STOP/CLEAR pad to: 1. Erase if you make a mistake during programming. 2. Cancel timer. 3. Stop the oven temporarily during cooking. 4. Return the time of day to the display. 5. Cancel a program during cooking, touch twice. TIME COOKING Your oven can be programmed for 99 minutes 99 seconds (99.99). Always enter the seconds after the minutes, even if they are both zeros. • Suppose you want to cook for 5 minutes at 100%. PROCEDURE DISPLAY 1 500 Enter cooking time. 5.00 COOK 2 START Touch START pad. 5.00 COOK This is a 12 hour clock. If you attempt to enter an incorrect clock time, ERROR will appear in the display. Touch the STOP/CLEAR pad and re-enter the time. • If the electrical power supply to your microwave oven should be interrupted, the display will intermittently show 8 8 : 8 8 after the power is reinstated. If this occurs during cooking, the program will be erased. The time of day will also be erased. Simply touch STOP/CLEAR pad and reset the clock for the correct time of day. 11