Sharp R-409YV Operation Manual - Page 15

CONTROLS COOKING IN ONE STAGE 1. Touch POWER pad. X6 (Select the desired power level.) The M/W indicator lights. The display will show what you touched. This example shows power level 5. NOTE : If steps 1 and 2 are omitted, the oven will cook at full power. 2. Touch number pads for the cooking time. The display will show what you touched. 3. Touch START pad. NOTE : Your oven can be programmed for 59 minutes 99 seconds. (59 : 99) When you touch START pad, the M/W indicator starts blinking to show the oven is cooking. The display counts down the time to show how much cooking time is left. When the cooking time ends, you will hear 3 beeps. NOTE : Using lower power levels increases the cooking time which is recommended for foods such as cheese, milk and slow cooking of meats. COOKING IN TWO STAGES All recipes require the frozen foods to be defrosted fully before cooking. This oven can be programmed to automatically defrost foods before cooking. 1. Touch DEFROST pad. The DEF indicator lights and " : 0" is displayed. 2. Touch number pads for the defrosting time you want. The display will show what you touched. 3. Touch POWER pad. X6 (Select the desired power level.) 4. Touch number pads for the desired cooking time. 5. Touch START pad. The M/W indicator lights and "P-HI" is displayed. The display will show what you touched. This example shows power level 5. The display will show what you touched. When you touch START pad, the DEF and M/W indicators come on to confirm the power levels selected. The DEF indicator starts blinking to show you that the oven is in DEFROST mode. The display counts down the time remaining in DEFROST mode. When the oven beeps, turn over, break apart and/or redistribute the food. At the end of DEFROST mode, the oven will beep and start M/W cook. The DEF indicator goes off and the M/W indicator starts blinking. The display counts down the time remaining in M/W mode. When M/W cook ends, you will hear 3 beeps. 15