Sharp UP-3500 UP-3500 Operation Manual - Page 247

I Report printer (4 PRINTERS ➝ 4 REPORT PRINTER .......... PGM1) (9 SYSTEM ➝ 1 PRINTERS ➝ 4 REPORT PRINTER .......... PGM2) (1) Select the PGM1 or PGM2 mode and touch the [2 POS SETTING] to perform the programming. (2) In the PGM1 mode, touch the [4 PRINTERS] button to display the menu, and touch the [4 REPORT PRINTER] button to program for the report printer. (2)' In the PGM2 mode, touch the [9 SYSTEM] button to display the menu, and touch the [1 PRINTERS] button to display the detail menu. Then touch the [4 REPORT PRINTER] button to program. (3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key. Repeat this step (3) satisfactorily. (4) To terminate the programming, touch the [EXIT] key. Text TERMINAL# CHANNEL# PRINTER NAME AUTO CUTTER PAPER SHEET LOGO PRT REPORT CASHIER NAME DATA PRINT HEADER LOGO PRINT Parameter [0] : [SELF TERMINAL No.] : This means local device. [1-254 (EXCEPT SELF TERMINAL NO.)] : RS232 connection (SHARED DEVICE) TCP/IP (4th octet of IP address) 0: not connect/TCP/IP connection 1-5 : RS232 connection (channel#) TM-T85/T88(3)/T88 mark4 TM-300 TM-U200/230 TM-T88(3)+LOGO TM-U220+LOGO ER-01PU TM-T90 NO: Disables auto cutter YES: Enables auto cutter TWO OR MORE: Two or more copy sheet ONE SHEET: One sheet PRINT: Prints the logo on report printer NOT PRINT: Does not print the logo on report printer NOT PRINT: Does not print the cashier name PRINT: prints the cashier name DISABLE: Disables data transaction ENABLE: Enables data transaction PRE-PRINT: Pre-print the header logo EACH ISSUE: Header logo is printed at each receipt issuing. 245