Sharp XL-E80 XL-E80 Operation Manual - Page 25

6 Press the PRESET ( or ) button to specify the minutes, then press the MEMORY button. " The timer playback starting time, function, and volume will be displayed, and then the unit will enter the stand-by mode automatically. " Timer set indicator will light up. Notes: " Once the time is set, the setting will be retained until a new time is entered. " When performing timer playback using another unit connected to the VIDEO/AUX IN jacks, select "VIDEO/AUX" in step 2. At this time, only this unit will be turned on or enter the power stand-by mode automatically. It will enter the power stand-by mode 1 hour after the timer playback starts. However, the other unit will not be turned on or off. ! Sleep operation 1 Play back the desired sound source. 2 Press the SLEEP button. XL-E80 Advanced Features To cancel the timer playback: Press the ON/STAND-BY button to turn the power on. 7 When the preset time is reached, playback will start. The volume will increase gradually until it reaches the volume you were listening at before your system enters the timer standby mode. 8 The unit will enter the stand-by mode one hour after the timer playback starts. However, when CD or tape playback time is one hour or less, it will enter the stand-by mode after completing playback. To reset or change the timer setting: Perform "Timer playback" from the beginning. To change the sleep time: Press the SLEEP button repeatedly to select the desired sleep time. The time will decrease as follows. The amount of sleep time can also be changed while in the sleep mode. (Maximum: 3 hours - Minimum: 5 minutes) 3:00 OFF 2:00 1:30 1:00 5 10 15 30 3 Your system will enter the power stand-by mode automat- ically after the preset time has elapsed. The volume will be turned down 10 seconds before the sleep operation finishes. 25