Sharp XL-HP505 XL-HP505 Operation Manual - Page 15

Setting the clock XL-HP505 5 Press the or button to adjust the hour and then press the MEMORY/SET button. Basic Operation Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. 6 Press the or button to adjust the minutes and then press the MEMORY/SET button. In this example, the clock is set for the 12-hour (AM 12:00) display. 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CLOCK/TIMER button. 3 Within 10 seconds, press the or button to select "CLOCK", and press the MEMORY/SET button. 4 Press the or button to select 12-hour or 24-hour dis- play and then press the MEMORY/SET button. "AM 12:00" "AM 0:00" "0:00" The 12-hour display will appear. (AM 12:00 - PM 11:59) The 12-hour display will appear. (AM 0:00 - PM 11:59) The 24-hour display will appear. (0:00 - 23:59) Press the or button once to advance the time by 1 minute. Hold it down to change the time in 5-minute intervals. To confirm the time display: 1 Press the CLOCK/TIMER button. 2 Within 10 seconds, press the or button until the current time is displayed. The time display will appear for about 10 seconds. Note: The "CLOCK" or time will flash to confirm the time display when the AC power supply is restored after a power failure or unplugging the unit. If incorrect, readjust the clock as follows. To readjust the clock: Perform "Setting the clock" from step 1. If the time display is flashing, step 4 (for selecting the 12-hour or 24-hour display) will be skipped. To change the 12-hour or 24-hour display: 1 Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on page 33 for details.] 2 Perform "Setting the clock" from step 1. Note: The clock can also be set with the remote control. 15