Sharp XL-UH240 XL-UH240 Operation Manual - Page 25
To remove USB memory device
View all Sharp XL-UH240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3 Select desired file to be played back by pressing the or button. Proceed to step 5. 4 Select desired file to be played back by pressing the or button. (Folder mode off) To remove USB memory device XL-UH240 1 Press the USB button on remote control. Wait until "UNPLUG OK" appears on FL display. 2 Disconnect USB memory device from the USB terminal. 5 Press the / (USB / ) button. Playback will start and the file name will be displayed. Title, Artist & Album name are displayed if they are recorded in the USB memory device. Display content can be changed by pressing the DISPLAY button. File Name Display TITLE-1 Indicator Title Display USB Memory Playback Function Display ( 1) TITLE-2 Indicator Artist Display Notes: SHARP will not be held liable for the loss of data while the USB memory device is connected to the audio system. This USB memory's format supports FAT16 or FAT32. ( 2) Clock Display ( 1) TITLE-3 Indicator Album Display Sharp cannot guarantee that all USB memory devices will work on this audio system. This USB memory cannot be operated via USB hub. If "NO SUPPORT" is displayed, it means "Copyright protected WMA file" or "Not supported playback file" is selected. ( 1) MP3 ID3-Tag only supports version 1.x. ( 2) Only appears when clock is already set. Note: To pause playback: Press the CD button. In case the data inside the USB memory is large, it may take longer time for data to be read. The USB terminal in this unit is not intended for a PC connection but is used for music streaming with a USB memory device. Auto power off function: In the stop mode of USB operation, the main unit enters the stand-by mode after 15 minutes of inactivity. 25