Singer 1 One Instruction Manual - Page 57
Place the thread slightly from
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
4. While holding the thread, firmly pull the thread between the tension disks. 5. Turn the handwheel toward you until the lower looper extends 5-10mm (approximately ½") from the needle plate edge. 6. Thread the looper area of the machine following the red color coded thread guides 4-10. 7. Place the thread slighty from left and to the right of threading guide . 8. Place the thread slightly from the front and to the back of threading guide . 9. Place the thread through , and . Three-Thread Overlock (narrow) page 10
4. While holding the thread, firmly pull the thread between the tension disks.
5. Turn the handwheel toward you until the lower looper extends 5-10mm
(approximately ½”) from the needle plate edge.
6. Thread the looper area of the machine following the red color coded
thread guides 4-10.
7. Place the thread slighty from left and
to the right of threading guide
f
.
8. Place the thread slightly from the
front and to the back of threading
guide
g
.
9. Place the thread through
h
,
i
and
j
.
Three-Thread Overlock (narrow) page 10