Singer 1 One Instruction Manual 33

Singer 1 One Manual

Get Singer 1 One PDF manuals and user guides View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals

Singer 1 One manual content summary:

  • Singer 1 One | Instruction Manual 33 - Page 1
    -Pitofeimihttat 14u. Operator's Guide SINGER Ele -pgkitAtled SINGER
  • Singer 1 One | Instruction Manual 33 - Page 2
    sewing machine. This machine will provide you with excellent performance in sewing from light to heavy material (lawn to denim). Please refer to this booklet for proper use and optimum service Contact your nearest Service Center should any top of it. • When sewing closely watch the area being
  • Singer 1 One | Instruction Manual 33 - Page 3
    1. Principal parts 2. Preparation prior to sewing 3. Threading the machine • Setting up the thread guide holder • How to open looper cover • How to remove cylinder cover • How to thread your machine correctly • How to change threads 4. Chain off and test sew 5. How to adjust thread tension 6. How
  • Singer 1 One | Instruction Manual 33 - Page 4
    1. Principal parts Thread guide holder Left hand looper thread tension dial Pressure regulating screw Right hand looper thread tension dial Needle thread tension dial Handle 0 Convertible bed plate Throat plate Free arm Spool pin Spool stand --• SINGER Pk4u6ieg Ury Looper cover • Machine with
  • Singer 1 One | Instruction Manual 33 - Page 5
    2. Preparation prior to sewing Connect the machine plug to the electrical receptacle of your speed, press the speed controller. The harder you press, the faster the machine will sew. To stop the machine from sewing, remove your foot from the speed controller. Caution: • Be sure that the electrical
  • Singer 1 One | Instruction Manual 33 - Page 6
    that they are located right above the spool pins. Place the thread on the spool stand as shown in the figure at the left. Thread guide holder Anti-spill sleeve Spool When using synthetic threads that easily spill off the 0 stand cop (cone) slip the anti-spill sleeve furnished with the
  • Singer 1 One | Instruction Manual 33 - Page 7
    • How to open looper cover SINGER LO -- © Push the cover to the right as far as it will go and 0 Pull cover down toward you. * Be sure looper cover is closed when sewing. • How to remove cylinder cover To replace cover Convertible 0 bed plate Spring Cylinder cover / 0 Push convertible bed
  • Singer 1 One | Instruction Manual 33 - Page 8
    • How to thread your machine correctly Correct sewing cannot be obtained when machine is threaded incorrectly. Threading is diagrammed on the inner side of the looper cover and identified with colors on the various thread guides. (1) Open looper cover. Thread the right looper in the order 0 to ® as
  • Singer 1 One | Instruction Manual 33 - Page 9
    yellow color). Cylinder cover must also be removed when threading this part. (Refer to page 5 for cylinder cover removal). Wind thread around thread guide when threading ® as shown in figure. Tension discs L (1) While holding thread with finger, pass it between the tension discs and pull thread
  • Singer 1 One | Instruction Manual 33 - Page 10
    page 14 for movable knife non-operating position). Wind thread around guide when threading as shown in figure. B While holding thread . G • Draw about 5cm (2 inches) of thread from needle eye. H SINGER 5cm (2 inches) (4) When needle thread is not correctly threaded betWeen the tension
  • Singer 1 One | Instruction Manual 33 - Page 11
    tie knot before the needle eye, cut the thread and pass it through the needle eye. 4. Chain off and test sew SINGER Thoirmowl, 1411.2 Thread cutter loth Pull Tie knot SINGER p o k,,,04 When the machine is completely threaded, turn the machine pulley toward you 2 or 3 turns while holding the
  • Singer 1 One | Instruction Manual 33 - Page 12
    to suit the type of material and size of the thread used. Tension becomes tighter as the tension dial is turned up toward the plus sign (+). • Correct thread tension Be sure the threads are correctly threaded since otherwise proper thread tension cannot be obtained (See page 6). Right looper thread
  • Singer 1 One | Instruction Manual 33 - Page 13
    (orange color) toward the plus sign (+). Or, turn the needle thread tension dial (blue) toward the plus sign (+). Or, turn both right and sewing condition. Since the adjustment can be made easily, adjust the stitch length to 4mm when sewing heavy weight fabrics such as quilting and to 2mm when sewing
  • Singer 1 One | Instruction Manual 33 - Page 14
    shown in figure at left, this machine becomes a free arm machine simply by pushing the convertible bed plate down making tubular work such as sewing sleeves very easy. This is especially convenient for finishing hard-to-reach areas such as arm holes and overcasting trouser cuffs. G O Slip tubular
  • Singer 1 One | Instruction Manual 33 - Page 15
    pressure of this machine is preadjusted at the factory to suit the sewing of medium weight fabrics. It may become necessary to adjust the screw Long groove Needle eye Insert the needle with the long groove to the front. Use Singer needle Cat. No. 2053. Available in sizes #10, #11, #14. Needles for
  • Singer 1 One | Instruction Manual 33 - Page 16
    is set to 3.5mm (9/64 inches) for normal sewing condition, however it can be increased up to 5mm (13/64 inches) for overedging heavy weight fabrics as instructed below. If any problems arise in making the adjustment, call your Singer representative. (1) Before making the adjustment, be sure that
  • Singer 1 One | Instruction Manual 33 - Page 17
    tighten set screw. (8) Return the movable knife to its original position. J Chaining-off finger Chaining-off finger set screw Presser foot (9) Test sew Make a test sample first so that you can correctly adjust the position of the chaining-off finger, since an improperly positioned finger may
  • Singer 1 One | Instruction Manual 33 - Page 18
    when it becomes dull. The stationary knife can be replaced according to the following steps, however if there are any difficulties experienced, call your Singer representative to make the adjustment. (1) Be sure that the power line plug is disconnected from the wall receptacle. (2) Open the looper
  • Singer 1 One | Instruction Manual 33 - Page 19
    12. Lubrication Special material is used for the important parts of this machine, therefore only occasional lubrication is required. The oiling points shown on the figure below should be lubricated periodically. 20-30 drops 2-3 rops O \ I \ ( .) 2-3 drops 17
  • Singer 1 One | Instruction Manual 33 - Page 20
    to make adjustment Whenever sewing difficulty is encoutered, Do not pull the fabric by hand. Use hand only to guide the fabric. • Tighten screw firmly. When the thread breaks. Change carbon brush.* • Have your Singer representative repair and service the controller. When motor is excessively noisy
  • Singer 1 One | Instruction Manual 33 - Page 21
    #80 - #90 Tetron #60 - #80 Spun #60 - #80 Tetron #60 - #80 Cotton #60 - #80 Spun #60 - #80 Tetron #50 - #60 Wooley nylon Wooley tetron Needle Singer Cat. No. 2053 #10 #11, #14 #14 #10, #11 #11, #14 #11, #14 19
  • Singer 1 One | Instruction Manual 33 - Page 22
    spill sleeve 3 16. Specification of the 14U12 machine Item Sewing speed Stitch length (amount of feed) Overedge stitch width 12 s.p.i.) 3.5 - 5 mm (Standard 3.5 mm) (9/64" - 13/64") 25 mm (1") 5 mm (13/64") Singer Cat. No. 2053 #10, #11, #14 3 Width 257 mm X Depth 231 mm X Height 290 mm (10-1/8"
  • Singer 1 One | Instruction Manual 33 - Page 23
  • Singer 1 One | Instruction Manual 33 - Page 24
    Form U 3209 (681) Part No. 543200-002 Printed in Japan
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
-
Pitofeimihttat
14u.
Operator's
Guide
-pgkitAtled
SINGER
Ele
SINGER