Singer 14CG754 ProFinish Instruction Manual 15 - Page 16

positioned

Get Singer 14CG754 ProFinish PDF manuals and user guides View all Singer 14CG754 ProFinish manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

• Turn the hand wheel toward you until the lower looper is at the far right. • Thread the looper area of the machine following the yellow color coded thread guides 4 - 7 . Note: Use the tweezers provided in the accessory set to aid in threading the looper. • Grasp the thread with the tweezers 4 cm (1-1/2 inches) from thread guide 7. • Place the thread with the point of the tweezers slightly under and to the left of threading guide 8. • Pull the thread up and into thread guide 8. • Pass the thread behind and over the top end of left looper 9-A. • Then pull it downward gently so that it will slip into the slot in the looper 9-B. • Pick up the thread and pass it through the hole in the end of the looper 10 . Note : Use the tweezers provided in the accessory set to aid in threading the looper. • The thread should be positioned in the groove of the lower looper. • Pull about 10cm (4 inches) of thread through the looper and place it over the top of the upper looper and to the back of the throat plate. SINGER 4 SING :Or •• 0 7 xl (1'0 C) co 0 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
•
Turn
the
hand
wheel
toward
you
until
the
lower
looper
is
at
the
far
right.
SINGER
4
•
Thread
the
looper
area
of
the
machine
following
the
yellow
color
coded
thread
guides
4
—
7
.
Note:
Use
the
tweezers
provided
in
the
accessory
set
to
aid
in
threading
the
looper.
•
Grasp
the
thread
with
the
tweezers
4
cm
(1-1/2
inches)
from
thread
guide
7.
•
Place
the
thread
with
the
point
of
the
tweezers
slightly
under
and
to
the
left
of
threading
guide
8.
•
Pull
the
thread
up
and
into
thread
guide
8.
•
Pass
the
thread
behind
and
over
the
top
end
of
left
looper
9-A.
:Or
••
SING
•
Then
pull
it
downward
gently
so
that
it
will
slip
into
the
slot
in
the
looper
9-B.
xl
•
Pick
up
the
thread
and
pass
it
through
the
hole
in
the
end
of
the
looper
10
.
Note
:
Use
the
tweezers
provided
in
the
accessory
set
to
aid
in
threading
the
looper.
•
The
thread
should
be
positioned
in
the
groove
of
the
lower
looper.
•
Pull
about
10cm
(4
inches)
of
thread
through
the
looper
and
place
it
over
the
top
of
the
upper
looper
and
to
the
back
of
the
throat
plate.
0
0
co
(
1
'0
C)
7
15