Singer 14T967DC Quantumlock Instruction Manual 26 - Page 15

Setting Up the Thread Guide Holder, Anti-spill Net, Spool Cap

Get Singer 14T967DC Quantumlock PDF manuals and user guides View all Singer 14T967DC Quantumlock manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

10. PREPARATION FOR THREADING Setting Up the Thread Guide Holder Take out the thread guide from the top of Styrofoam, and insert it as shown on illustration. This machine is shipped with the thread guide holder in the lowered position. Fully extend the thread guide holder. The two joints on the telescope will click into place when they are correctly positioned. Center the thread guides above the spool pins. Place thread over the cone adapters on the spool pins. Note: Your new machine is threaded to sew Triple Cover Stitch. Refer to Page 30 for instructions on tying on to the threads. Anti-spill Net When using synthetic threads that easily spill off the cone, slip the anti-spill net furnished with the machine over the thread from the bottom of the cone leaving the thread end hanging free at the top of the anti-spill net as shown on illustration. Spool Cap When using a regular thread spool, fit the spool cap supplied with the machine onto the thread spool as shown on illustration. 14 Anti-spill net Spool cap Press in Thread spool

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
14
10. PREPARATION FOR THREADING
Setting Up the Thread Guide Holder
Anti-spill Net
Spool Cap
When using synthetic threads that easily spill off
the cone, slip the anti-spill net furnished with the
machine over the thread from the bottom of the
cone leaving the thread end hanging free at the
top of the anti-spill net as shown on illustration.
Take out the thread guide from the top of
Styrofoam, and insert it as shown on illustration.
This machine is shipped with the thread guide
holder in the lowered position.
Fully extend the thread guide holder.
The two joints on the telescope will click into place
when they are correctly positioned.
Center the thread guides above the spool pins.
Place thread over the cone adapters on the spool
pins.
Note: Your new machine is threaded to sew
Triple Cover Stitch. Refer to Page 30 for
instructions on tying on to the threads.
When using a regular thread spool, fit the spool cap
supplied with the machine onto the thread spool as
shown on illustration.
Anti-spill net
Spool cap
Press in
Thread spool