Singer 14T967DC Quantumlock Instruction Manual 27 - Page 89
Before threading the eye of the needle, make sure the thread is
View all Singer 14T967DC Quantumlock manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
5. Continue to thread points 4-8. Slip the thread into the rear slot of the thread guide . Go over the take up lever . Continue by slipping the thread into the right slot of the thread guides and . 8. Before threading the eye of the needle, make sure the thread is behind the thread guide located on the bottom of the needle clamp. 9. Draw about 4 inches of the thread through the needle eye towards the back of the machine. 10. Place the thread to the back, under the Presser Foot. Three-Thread Flatlock (narrow) page 13
5. Continue to thread points 4-8.
Slip the thread into the rear slot of the
thread guide
g
.
Go over the take up lever
h
.
Continue by slipping the
thread into the right slot of the thread guides
i
and
j
.
8. Before threading the eye of the needle, make sure the thread is
behind
the thread guide located on the bottom of the needle clamp.
9. Draw about 4 inches of the thread through the needle eye towards the back
of the machine.
10. Place the thread to the back, under the Presser Foot.
Three-Thread Flatlock (narrow) page 13