Singer 14T968DC PROFESIONAL 5 Instruction Manual 3 - Page 46

Natd:g

Get Singer 14T968DC PROFESIONAL 5 PDF manuals and user guides View all Singer 14T968DC PROFESIONAL 5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

ATD:G Tension is automatically set when seiecting the desired stitch type with the Auto Tension Dial (ATD). Tension may be fine tuned with the Fine Tuning Levers according to the following variables: N 2~4 Set auto tension dial to G as shown on illustration and test sew on a sample of your fabric. When the lower looper thread tension is too loose; -Move the lower looper thread tension fine tuning lever (red) toward a higher position. When the left needle thread tension is too loose; -Move the left needle thread tension fine tuning lever (orange) toward a higher position. When the right needle thread tension is too loose; -Move the needle thread tension fine tuning lever (blue) toward a higher position. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
45
Set auto tension dial to G as shown on illustration and
test sew on a sample of your fabric.
When the lower looper thread tension is too loose;
-Move the lower looper thread tension
lever (red)
fine tuning
toward a higher
.
position
When the left needle thread tension is too loose;
-
the left needle thread tension
(orange)
Move
fine tuning lever
toward a higher
.
position
When the right needle thread tension is too loose;
-
the needle thread tension
(blue)
Move
fine tuning lever
toward a higher
.
position
N
2~4
Tension is automatically set when seiecting the
desired stitch type with the Auto Tension Dial (ATD).
Tension may be fine tuned with the Fine Tuning Levers
according to the following variables:
ATD:G