Singer ESP2 Magic Steam Press Instruction Manual - Page 9
Steam Burst, Important Note, Steaming Tips - fabric steam press
View all Singer ESP2 Magic Steam Press manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
TIPS PRESSING STEAM BURST 1.Hold Pressing Plate approximately 3" above Ironing Board. 2.Press Steam Burst Button to release a burst of steam onto fabric. 3.Lowr Pressing Plate onto fabric, then raise once again. 4.Repeat steps 1-3 above until fabric is smooth and wrinkle-free. IMPORTANT NOTE FOR BEST RESULTS, PRESS BUTTON FOR 2 SECONDS AND RELEASE. STEAMING TIPS Pressing Garments 1. Lay the garment on the Ironing Board. 2. Lower the steam plate and return to the open position after a few seconds. NOTE: the unit will automatically turn off the heating plate after 10 seconds in the closed position. A beep will emit until the unit is opened. Once the unit is opened, it will return to normal operation. Wrinkle Removal 1. Lower the Steam Plate until it is slightly above the Ironing Board(about three inches). 2.Activate the Burst of Steam with the buttons on the sides of the Pressing Handle. 3.Wait a few seconds, and activate the Burst of Steam again. 8