Singer Heavy Duty 6700C Accessory User Guide - Page 26

Ruffler Foot

Get Singer Heavy Duty 6700C PDF manuals and user guides View all Singer Heavy Duty 6700C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

DECORATIVE & CRAFTING SEWING RUFFLER FOOT #2500270.01 M/C Code: MA, MB, MC, CA, CB, CC, CE, EA, EB, EC The Ruffler Foot is used to create perfectly spaced pleats and gathers. It can also make pleated or gathered ruffles that are simultaneously stitched to a project. Parts of the Ruffler: a. Ruffler Regulator-determines the frequency of the tucks 1 = every stitch creates a tuck 6 = every 6th stich creates a tuck 12 = every 12th stitch creates a tuck • = no tucks are created b. Adjusting Screw or Indicator-determines the depth of the tucks (Settings 0-8, with 0 for the least fullness and 8 for the deepest pleats) c. Ruffling Blade-forms the gathers or pleats by pushing the fabric to the needle d. Separator Blade-bottom plate of the attachment e. Separator Guides-slots to guide the edge of the fabric To Make a Ruffle or Gather: 1. Remove the regular presser foot and attach the Ruffler Foot - the fork arm goes around the needle screw clamp then attach to the shank with the screw. Secure the screw. 2. Set the machine for a straight stitch. 3. Adjust stitch length. (A shorter stitch length creates pleats that are closer together.) 4. Check that the needle clears the hole in the ruffle attachment. 5. Position the fabric right side up between the ruffling blade and the separator blade and under the first separator guide. 6. Push the ruffling blade towards the needle. 7. Stitch gathers or pleats. Note: Always use scraps of the fabric to test the settings before stitching on your project. To Make a Ruffle and Attach to Fabric in One Operation: 8. Follow Steps 1-4, and then proceed with Step 9. 9. Position the fabric to be ruffled or gathered, right side down, between the ruffling blade and the separator blade and under the first separator guide. 10. Place the fabric that will remain flat right side up, between the separator blade and the machine feed dogs and under the first separator guide. 11. Push the ruffling blade towards the needle. 12. Lower the presser foot and sew. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
26
RUFFLER FOOT
#2500270.01
M/C Code: MA, MB, MC, CA, CB, CC, CE, EA, EB, EC
The Ruffler Foot is used to create perfectly spaced pleats and gathers.
It can also make pleated or gathered ruffles that are simultaneously
stitched to a project.
Parts of the Ruffler:
a.
Ruffler Regulator—determines the frequency of the tucks
1 = every stitch creates a tuck
6 = every 6th stich creates a tuck
12 = every 12th stitch creates a tuck
• = no tucks are created
b.
Adjusting Screw or Indicator—determines the depth of the tucks
(Settings 0-8, with 0 for the least fullness and 8 for the deepest
pleats)
c.
Ruffling
Blade—forms the gathers or pleats by pushing the fabric to
the needle
d.
Separator Blade—bottom plate of the attachment
e.
Separator Guides—slots to guide the edge of the fabric
To Make a Ruffle or Gather:
1.
Remove the regular presser foot and attach the Ruffler Foot - the
fork arm goes around the needle screw clamp then attach to the
shank with the screw.
Secure the screw.
2.
Set the machine for a straight stitch.
3.
Adjust stitch length. (A shorter stitch length creates pleats that are
closer together.)
4.
Check that the needle clears the hole in the ruffle attachment.
5.
Position the fabric right side up between the ruffling blade and the
separator blade and under the first separator guide.
6.
Push the ruffling blade towards the needle.
7.
Stitch gathers or pleats.
To Make a Ruffle and Attach to Fabric in One Operation:
8.
Follow Steps 1-4, and then proceed with Step 9.
9.
Position the fabric to be ruffled or gathered, right side down,
between the ruffling blade and the separator blade and under the
first separator guide.
10.
Place the fabric that will remain flat right side up, between the
separator blade and the machine feed dogs and under the first
separator guide.
11.
Push the ruffling blade towards the needle.
12.
Lower the presser foot and sew.
Note:
Always use scraps of the fabric to test
the settings before stitching on your project.
DECORATIVE & CRAFTING SEWING