Sony Ericsson SmartBand Talk SWR30 User Guide - Page 4

Understanding the display Your SmartBand Talk features an E Ink® display that uses electronic ink technology to reproduce the appearance of ordinary ink on paper. In an E Ink® display, no backlight is used. Instead, ambient light from the environment is reflected from the surface of the display, making it more comfortable to read. The image on your E Ink® screen is retained even when power to the screen is turned off. Also note that when the content displayed on the screen changes, there is a brief transition time. This is normal E Ink® display behavior. Interacting with the SmartBand Talk You can control applications by firmly tapping the SmartBand Talk and you can navigate from screen to screen by pressing the function key. If the screen is idle for 30 seconds, the idle mode screen becomes active. Tapping • Handle installed applications, for example, add bookmarks. The display of the SmartBand Talk is not touch sensitive. Remember to firmly tap the SmartBand Talk in order for the device to register a command. Also note that the screen does not recognise swiping movements. Function key You can use the function key to navigate between different screens and applications. To navigate from one screen to another • Short press the function key. To exit an application • Long press the function key. After the application closes, the idle mode screen becomes active. Charging your SmartBand Talk Before using your SmartBand Talk for the first time, you need to charge it for approximately 30 minutes. Sony chargers are recommended. If your SmartBand Talk is not used during charging, it takes 45 to 70 minutes to fully charge it depending on the type of charger used. 4 This is an Internet version of this publication. © Print only for private use.