Sony Ericsson Z525a User Guide - Page 39

Push to Talk (PTT) PTT calls To make a PTT call 1 Press to access the PTT contacts list. If the clamshell is closed, the Contacts screen appears on the external display. Use the volume keys to scroll through the list. 2 Select the contact or group you want to call. Make sure the contact/group shows Available ( / ) or Silent/Vibrate ( / ). 3 Press to activate the call. After the tone sounds you have the floor and may begin speaking. 4 Hold the PTT key down while speaking. Release it when you are not. 5 To end the PTT session, turn off the speaker and close the phone or press More } End Call. You will be automatically disconnected if there is no activity for 30 seconds. To receive a PTT call 1 For the best results, set your ringer to the highest volume setting. 2 If your status is available, a tone signals an incoming PTT call. The caller's information appears on the screen and you automatically hear the caller's voice. 3 When the phone is in silent mode, the caller's information appears. A vibrating alert replaces the tone. You must manually accept the PTT call when the phone is in silent mode. • Answer - transfers the caller's voice to the ear speaker. • Busy - ends the call. PTT calls are not forwarded to voicemail. To end a PTT call Either wait for the call to time out from inactivity or press End Call. To make a Quick Group Call Make a PTT group call without previously creating a PTT group. 1 } to access your contact list. 2 Highlight the first member of the Quick Group. 3 Press Mark to select group members from the list. 4 Press Continue. 5 Press and hold to call. • Leave a voicemail for the Quick Group. • Save the Quick Group. 38 This is the Internet version of the user's guide. © Print only for private use.