Sony BDP-N460 Operating Instructions - Page 20
Connecting to an HDMI jack, commentary, set BD Audio Setting - blu ray manual
UPC - 027242774902
View all Sony BDP-N460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Connecting to an HDMI jack If your AV amplifier (receiver) has an HDMI input, use this connection. You can enjoy higher quality sound from the connected AV amplifier (receiver). To enjoy 7.1 channel sound, use a High Speed HDMI cable. If you connect a Sony AV amplifier (receiver) that is compatible with the "Control for HDMI" function (page 16), refer to the instruction manual supplied with the AV amplifier (receiver). Blu-ray Disc/DVD player HDMI cable (not supplied) AV amplifier (receiver) HDMI cable (not supplied) 1 Connect the HDMI OUT jack of the player and your AV amplifier (receiver). 2 Set "BD Audio Setting" to "Direct" in the "Audio Settings" setup (page 46). To enjoy the secondary audio (commentary), set "BD Audio Setting" to "Mix." TV z Check that "Audio (HDMI)" is set to "Auto" in the "Audio Settings" setup (page 46). b Not all HDMI-compatible AV amplifiers (receivers) accept 8ch Linear PCM signals. Refer as well to instruction manual supplied with the connected AV amplifier (receiver). 20