Sony BDP-S390 Operating Instructions - Page 33

Specifications, Others - audio settings

Page 33 highlights

Additional Information The System Power-Off function does not work (BRAVIA Sync). , Check that [Control for HDMI] and [HDMI: Linked to TV-off] are set to [On] (page 27). Others Playback does not start from the beginning of content. , Press OPTIONS, and select [Play from beginning]. The player does not respond to any button. , Moisture has condensed inside the player (page 4). , Hold down [/1 on the player for more than 10 seconds until the player turns off. If the player still does not respond to any button, disconnect then reconnect the AC power cord. Specifications Playback does not start from the resume point where you last stopped playing. , The resume point may be cleared from memory depending on the disc when - you open the disc tray. - you disconnect the USB device. - you play other content. - you turn off the player. The disc tray does not open and you cannot remove the disc even after you press Z. , Try the following: 1Turn the player off, and disconnect the AC power cord. 2Reconnect the AC power cord while pressing down Z on the player. 3Keep pressing down Z on the player until the tray opens. 4Remove the disc. 5Hold down [/1 on the player for more than 10 seconds until the player turns off. System Laser: Semiconductor laser Inputs and outputs (Jack name: Jack type/Output level/Load impedance) LINE OUT R-AUDIO-L: Phono jack/2 Vrms/10 kilohms DIGITAL OUT (COAXIAL): Phono jack/0.5 Vp-p/75 ohms HDMI OUT: HDMI 19-pin standard connector LINE OUT VIDEO: Phono jack/1.0 Vp-p/75 ohms LAN (100): 100BASE-TX Terminal USB: USB jack Type A (For connecting a USB memory, memory card reader, digital still camera, and digital video camera) Wireless Wireless LAN standard: IEEE 802.11 b/g/n Frequency range: 2.4 GHz band: Channels 1-11 Modulation: DSSS and OFDM 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

33
Additional Information
The System Power-Off function does
not work (BRAVIA Sync).
,
Check that [Control for HDMI] and
[HDMI: Linked to TV-off] are set to
[On] (page 27).
Playback does not start from the
beginning of content.
,
Press OPTIONS, and select [Play from
beginning].
Playback does not start from the
resume point where you last stopped
playing.
,
The resume point may be cleared from
memory depending on the disc when
you open the disc tray.
you disconnect the USB device.
you play other content.
you turn off the player.
The disc tray does not open and you
cannot remove the disc even after you
press
Z
.
,
Try the following:
1
Turn the player
off, and disconnect the AC power cord.
2
Reconnect the AC power cord while
pressing down
Z
on the player.
3
Keep pressing down
Z
on the player
until the tray opens.
4
Remove the
disc.
5
Hold down
[
/
1
on the player
for more than 10 seconds until the
player turns off.
The player does not respond to any
button.
,
Moisture has condensed inside the
player (page 4).
,
Hold down
[
/
1
on the player for more
than 10 seconds until the player turns
off.
If the player still does not respond to
any button, disconnect then reconnect
the AC power cord.
Specifications
System
Laser:
Semiconductor laser
Inputs and outputs
(
Jack name:
Jack type/Output level/Load
impedance)
LINE OUT R-AUDIO-L:
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT:
HDMI 19-pin standard connector
LINE OUT VIDEO:
Phono jack/1.0 Vp-p/75 ohms
LAN (100):
100BASE-TX Terminal
USB:
USB jack Type A (For connecting a
USB memory, memory card reader,
digital still camera, and digital video
camera)
Wireless
Wireless LAN standard:
IEEE 802.11 b/g/n
Frequency range:
2.4 GHz band: Channels 1-11
Modulation:
DSSS and OFDM
Others