Sony BDP-SX1000 Operating Instructions - Page 21

Settings and Adjustments Audio Settings Downmix Surround Audio (HDMI) Auto PCM Normally select this. Outputs audio signals according to the status of the connected HDMI device. Outputs PCM signals from the HDMI OUT jack. BD Audio MIX Setting On Outputs the audio obtained by mixing the interactive and secondary audio to the primary audio. Off Outputs the primary audio only. Select this to output HD audio signals to an AV amplifier (receiver). DTS Neo:6 Cinema Music Off Performs "DTS Neo:6 Cinema" mode decoding. A source recorded in 2-channel format is decoded into 7 channels. Performs "DTS Neo:6 Music" mode decoding. A source recorded in 2-channel format is decoded into 7 channels. This setting is ideal for normal stereo sources such as CDs. Turns off "DTS Neo:6" decoding. Audio DRC Auto On Off Performs playback at the dynamic range specified by the disc (BD-ROM only). Other discs are played back at the "On" level. Performs playback at a standard compression level. No compression works. A more dynamic sound is produced. Stereo *1 *2 Outputs audio signals with surround effects. Select this when connecting an audio device that supports Dolby Surround (Pro Logic)*1 or DTS Neo:6*2. Outputs audio signals without surround effects. Select this when connecting an audio device that does not support Dolby Surround (Pro Logic) or DTS Neo:6. 21