Sony BDV-E4100 Operating Instructions - Page 57
Audio Return Channel function., The sound outputs from the center
View all Sony BDV-E4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Additional Information An image is not displayed on the entire TV screen. t Check the setting of [TV Type] in [Screen Settings] (page 46). t The aspect ratio on the disc is fixed. Color irregularity occurs on the TV screen. t If the speakers are used with a CRTbased TV or projector, install the speakers at least 0.3 meters (1 foot) from the TV set. t If the color irregularity persists, turn off the TV set once, then turn it on after 15 to 30 minutes. t Make sure that no magnetic object (magnetic latch on a TV stand, health care device, toy, etc.) is placed near the speakers. Sound There is no sound. t The speaker cords are not connected securely. t Check the speaker settings (page 40). There is no sound from the TV via the HDMI (OUT) jack when using the Audio Return Channel function. t Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On] (page 50). Also, set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Auto] (page 50). t Make sure that your TV is compatible with the Audio Return Channel function. t Make sure that an HDMI cable is connected to a jack on your TV that is compatible with the Audio Return Channel function. The system does not output sound of TV programs correctly when connected to a set-top box. t Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off] (page 50). t Check the connections (page 20). Severe hum or noise is heard. t Move your audio equipment away from the TV. t Clean the disc. The sound loses stereo effect when you play a CD. t Select stereo sound by pressing AUDIO (page 37). The sound outputs from the center speaker only. t Depending on the disc, the sound may output from the center speaker only. No sound or only a very low-level sound is heard from the surround speakers. t Check the speaker connections and settings (pages 18, 40). t Check the sound mode setting (page 24). t Depending on the source, the effect of the surround speakers may be less noticeable. t A 2-channel source is being played. Distortion occurs in the sound of a connected equipment. t Reduce the input level for the connected equipment by setting [Attenuate - AUDIO] (page 48). A sudden loud music is heard. t The build-in sound demonstration is activated. Press VOL - to reduce the volume or press x to stop the demonstration. 57US