Sony BDV-E870 Operating Instructions - Page 44

External Audio Device Using an S-AIR Product When you purchase the S-AIR product, you need to perform the following settings to activate wireless transmission. About S-AIR products There are two types of S-AIR product. • S-AIR main unit (this unit): This is for transmitting sound. You can use up to three S-AIR main units. (The number of usable S-AIR main units depends on the use environment.) • S-AIR sub unit: This is for receiving sound. - Surround amplifier (optional): You can enjoy surround speaker sound wirelessly. - S-AIR receiver (optional): You can enjoy system sound in another room. Room A S-AIR main unit S-AIR sub unit (surround amplifier) Room B S-AIR sub unit (S-AIR receiver) (not supplied) Note • When you insert the wireless transmitter/transceiver, make sure that the AC power cord (mains lead) is not connected to a wall outlet (mains). • Do not touch the terminals of the wireless transmitter/ transceiver. To insert the wireless transmitter into the unit 1 Remove the screws directly below the mark. Rear of the unit EZW-T100 EZW-T100 Note • Remove the screws that are indicated in the illustration. Do not remove other screws. 2 Insert the wireless transmitter. Rear of the unit EZW-T100 EZW-T100 Inserting the wireless transmitter/transceiver To make use of the S-AIR function, you need to insert the wireless transmitter into the unit and the wireless transceiver into the S-AIR sub unit. 44US Note • Insert the wireless transmitter with the S-AIR logo facing up. • Insert the wireless transmitter so that the V marks are aligned. • Do not insert anything other than the wireless transmitter into the EZW-T100 slot.