Sony BDV-E980W Operating Instructions - Page 71
Wireless sound, Tuner, Wireless Sound Connection]
View all Sony BDV-E980W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Additional Information Wireless sound Symptom Wireless transmission is not activated or there is no sound from the surround speakers. Noise is heard from surround speakers or sound from the surround speakers skips. Problems and solutions Check the status of the LINK/STANDBY indicator on the surround amplifier. • Turns off. - Check that the AC power cord (mains lead) of the surround amplifier is connected securely. - Turn the surround amplifier on by pressing "/1 on the surround amplifier. • Flashes green quickly. - 1 Press "/1 on the surround amplifier. 2 Insert the wireless transceiver into the surround amplifier correctly. 3 Press "/1 on the surround amplifier. • Flashes red. - Press "/1 to turn off the surround amplifier, and check the following items. 1Are the + and - speaker cords short-circuited? 2Is anything blocking the ventilation holes of the surround amplifier? After checking the above items and fixing any problems, turn on the surround amplifier. If the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer. • Flashes green or orange slowly or turns red. - Make sure that the wireless transceiver is inserted correctly into the main unit. - Make the [Secure Link] setting again (page 54). - Sound transmission is poor. Move the surround amplifier so that the LINK/ STANDBY indicator turns green or orange. - Move the system away from other wireless devices. - Avoid using any other wireless devices. • Turns green or orange. - Check the speaker connections and settings. • Wireless transmission is unstable. Change the [RF Channel] setting in [Wireless Sound Connection] (page 55). • Install the unit and surround amplifier closer to each other. • Do not install the unit and surround amplifier in a closed rack, on a metal rack, or under a table. Tuner Symptom Radio stations cannot be tuned in. Problems and solutions • Check that the antenna (aerial) is connected securely. Adjust the antenna (aerial) or connect an external antenna (aerial) if necessary. • The signal strength of the stations is too weak (when tuning in with automatic tuning). Use manual tuning. 71US