Sony BVME250 Brochure - Page 2

Specifications tentative, Main Features, Optional Accessories - oled

Page 2 highlights

Main Features Picture performance Sony's Super Top Emission OLED display panel 24.5-inch (623.4 mm, diag.) and 16.5-inch (420.0 mm, diag.) full-HD (1920 x 1080) resolution OLED display panels with an RGB 10-bit panel driver Superb picture quality • Accurate black reproduction • Outstanding contrast performance in ambient light and dark environments • Quick response with virtually no motion blur • High-purity deep color reproduction and wide color gamut Digital signal processing 12-bit output accuracy digital signal processing Nonlinear cubic conversion color-management system Highly-accurate I/P conversion with extremely low process delay Multi-format signal interfaces Standard ports: 3G/HD/SD-SDI (x2), HDMI™ (x1), DisplayPort (x1)*1 Optional ports for up to four optional input adaptors (see the optional accessories) 3D signal analyzing functions (3D signal input, 2D display)*2 Difference display Checkerboard display L/R switch display Horopter check display Flip H display Other features Inheriting beneficial features from the BVM-L series *1 DisplayPort will be supported from the monitor software version 1.1 or later. *2 Requires the BKM-250TG 3G-SDI input adaptor (serial number 7200001 or later), sold separately. 3D signals are not displayed in stereoscopic view. Optional Accessories BKM-16R BKM-250TG BKM-244CC BKM-243HS BKM-220D BKM-229X BKM-227W BKM-37H BKM-39H SMF-700 Monitor Control Unit 3G/HD/SD-SDI Input Adaptor (serial number 7200001 or higher) HD/SD-SDI Closed Caption Adaptor HD/SD-SDI Input Adaptor (serial number 2108355 or higher) SD-SDI 4:2:2 Input Adaptor (serial number 2100001 or higher) Analog Component Adaptor (serial number 2200001 or higher) NTSC/PAL Input Adaptor Controller Attachment Stand with tilt function for BVM-E250 Controller Attachment Stand for BVM-E170 Monitor Interface Cable Specifications (tentative) BVM-E250 BVM-E170 Picture Performance Panel OLED panel Picture size (diagonal) 24 5/8 inches (623.4 mm) 16 5/8 inches (420.0 mm) Effective picture size (H x V) 21 1/2 x 12 1/8 inches (543.4 x 305.6 mm) 14 1/2 x 8 1/8 inches (365.8 x 205.7 mm) Resolution (H x V) 1920 x 1080 pixels (Full HD) Aspect 16:9 Pixel efficiency 99.99% Panel drive RGB 10-bit Panel frame rate 48 Hz / 50 Hz / 60 Hz / 72 Hz / 75 Hz (48 Hz, 60 Hz, and 72 Hz are also compatible with 1/1.001 frame rates) Viewing angle (panel specification) 89°/89°/89°/89° (typical) (up/down/left/right contrast > 10:1) Standard luminance 100 cd/m2 (preset1 to preset5) 48 cd/m2 (preset (D-Cine)) (1.0 Vp-p reference signal, 100% white signal input) Input SDI BNC (x2) HDMI HDMI (x1) (HDCP correspondence, Deep Color correspondence) DisplayPort DisplayPort connector (x1)*1 Option port 4 ports Parallel remote D-sub 9-pin (female) (x1) Serial remote (LAN) Ethernet (10BASE-T/100BASE-TX), RJ-45 (x1) Output SDI BNC (x1) DC 5 V out Circle 4-pin (female) (x1) General Power requirement AC 100 V to 240 V, 1.6 A to 0.8 A, 50/60 Hz AC 100 V to 240 V, 1.4 A to 0.7 A, 50/60 Hz DC 24 V to 28 V, 4.7 A to 4.0 A Power consumption Approx. 145 W (at maximum load, the Approx. 115 W (AC), 106 W (DC) (at luminance compensation due to the aged maximum load, the luminance compensation deterioration included.) due to the aged deterioration included.) Approx. 72 W (input from the standard Approx. 65 W (AC), 60 W (DC) (input from HDMI input, the default status.) the standard HDMI input, the default status.) Dimensions (W x H x D) 22 3/4 x 16 3/4 x 5 7/8 inches 17 1/4 x 11 1/4 (10 1/2)*2 x 8 1/2 inches (576.0 x 424.0 x 148.0 mm) (436.0 x 282.4 (266.4)*2 x 214.7 mm) Weight 28 lb 11 oz (13.0 kg) 18 lb 11 oz (8.5 kg) Supplied accessories AC power cord (1), AC plug holder (1), AC power cord (1), AC plug holder (1), Bracket Bracket (1), Operation Manual (Japanese, (1), Rack mount bracket (2), Operation English, each 1), CD-ROM (1), Using the Manual (Japanese, English, each 1), CD-ROM Manual (1) CD-ROM (1), Using the CD-ROM Manual (1) *1 DisplayPort will be supported from the monitor software version 1.1 or later. *2 Height without legs Sony Electronics Inc. 1 Sony Drive Park Ridge, NJ 07656 sony.com/oledmonitor DI-0225 (MK10814V1) The BVM-E250 and BVM-E170 are produced at Sony EMCS Corporation Tokai Tec, which has received ISO14001 Environmental Management System certification. ©2011 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Features and specifications are subject to change without notice. Screen images are simulated. Weights and measurements are approximate. Sony, make.believe and their respective logos, and TRIMASTER are trademarks of Sony. HDMI is a trademark of HDMI Licensing, LLC. All other trademarks are the properties of their respective owners. Printed in USA (2/11)

  • 1
  • 2

Specifications (tentative)
Main Features
Optional Accessories
BVM-E250
BVM-E170
Picture Performance
Panel
OLED panel
Picture size (diagonal)
24 5/8 inches (623.4 mm)
16 5/8 inches (420.0 mm)
Effective picture size (H x V)
21 1/2 x 12 1/8 inches (543.4 x 305.6 mm)
14 1/2 x 8 1/8 inches (365.8 x 205.7 mm)
Resolution (H x V)
1920 x 1080 pixels (Full HD)
Aspect
16:9
Pixel efficiency
99.99%
Panel drive
RGB 10-bit
Panel frame rate
48 Hz / 50 Hz / 60 Hz / 72 Hz / 75 Hz
(48 Hz, 60 Hz, and 72 Hz are also compatible with 1/1.001 frame rates)
Viewing angle
(panel specification)
89°/89°/89°/89° (typical) (up/down/left/right contrast > 10:1)
Standard luminance
100 cd/m
2
(preset1 to preset5) 48 cd/m
2
(preset (D-Cine))
(1.0 Vp-p reference signal, 100% white signal input)
Input
SDI
BNC (x2)
HDMI
HDMI (x1) (HDCP correspondence, Deep Color correspondence)
DisplayPort
DisplayPort connector (x1)*
1
Option port
4 ports
Parallel remote
D-sub 9-pin (female) (x1)
Serial remote (LAN)
Ethernet (10BASE-T/100BASE-TX), RJ-45 (x1)
Output
SDI
BNC (x1)
DC 5 V out
Circle 4-pin (female) (x1)
General
Power requirement
AC 100 V to 240 V, 1.6 A to 0.8 A, 50/60 Hz
AC 100 V to 240 V, 1.4 A to 0.7 A, 50/60 Hz
DC 24 V to 28 V, 4.7 A to 4.0 A
Power consumption
Approx. 145 W (at maximum load, the
luminance compensation due to the aged
deterioration included.)
Approx. 72 W (input from the standard
HDMI input, the default status.)
Approx. 115 W (AC), 106 W (DC) (at
maximum load, the luminance compensation
due to the aged deterioration included.)
Approx. 65 W (AC), 60 W (DC) (input from
the standard HDMI input, the default status.)
Dimensions (W x H x D)
22 3/4 x 16 3/4 x 5 7/8 inches
(576.0 x 424.0 x 148.0 mm)
17 1/4 x 11 1/4 (10 1/2)*
2
x 8 1/2 inches
(436.0 x 282.4 (266.4)*
2
x 214.7 mm)
Weight
28 lb 11 oz (13.0 kg)
18 lb 11 oz (8.5 kg)
Supplied accessories
AC power cord (1), AC plug holder (1),
Bracket (1), Operation Manual (Japanese,
English, each 1), CD-ROM (1), Using the
CD-ROM Manual (1)
AC power cord (1), AC plug holder (1), Bracket
(1), Rack mount bracket (2), Operation
Manual (Japanese, English, each 1),
CD-ROM (1), Using the CD-ROM Manual (1)
*1 DisplayPort will be supported from the monitor software version 1.1 or later.
*2 Height without legs
Sony’s Super Top Emission OLED display panel
24.5-inch (623.4 mm, diag.) and 16.5-inch
(420.0 mm, diag.) full-HD (1920 x 1080)
resolution OLED display panels with an RGB
10-bit panel driver
Superb picture quality
• Accurate black reproduction
• Outstanding contrast performance in
ambient light and dark environments
• Quick response with virtually no motion blur
• High-purity deep color reproduction and
wide color gamut
BKM-16R
Monitor Control Unit
BKM-250TG
3G/HD/SD-SDI Input Adaptor
(serial number 7200001 or higher)
BKM-244CC
HD/SD-SDI Closed Caption Adaptor
BKM-243HS
HD/SD-SDI Input Adaptor
(serial number 2108355 or higher)
BKM-220D
SD-SDI 4:2:2 Input Adaptor
(serial number 2100001 or higher)
BKM-229X
Analog Component Adaptor
(serial number 2200001 or higher)
BKM-227W
NTSC/PAL Input Adaptor
BKM-37H
Controller Attachment Stand with tilt function for BVM-E250
BKM-39H
Controller Attachment Stand for BVM-E170
SMF-700
Monitor Interface Cable
Picture performance
Digital signal processing
Multi-format signal interfaces
Other features
3D signal analyzing functions
(3D signal input, 2D display)*
2
12-bit output accuracy digital signal
processing
Nonlinear cubic conversion
color-management system
Highly-accurate I/P conversion with extremely
low process delay
Standard ports: 3G/HD/SD-SDI (x2), HDMI™
(x1), DisplayPort (x1)*
1
Optional ports for up to four optional input
adaptors (see the optional accessories)
Inheriting beneficial features from the BVM-L
series
*1 DisplayPort will be supported from the monitor software
version 1.1 or later.
*2 Requires the BKM-250TG 3G-SDI input adaptor (serial
number 7200001 or later), sold separately.
3D signals
are not displayed in stereoscopic view.
Difference display
Checkerboard display
L/R switch display
Horopter check display
Flip H display
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
sony.com/oledmonitor
DI-0225
(MK10814V1)
©2011 Sony Electronics Inc. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
Screen images are simulated.
Weights and measurements are approximate.
Sony, make.believe and their respective logos,
and TRIMASTER are trademarks of Sony.
HDMI is a trademark of HDMI Licensing, LLC.
All other trademarks are the properties of their respective owners.
Printed in USA (2/11)
The BVM-E250 and BVM-E170 are produced
at Sony EMCS Corporation Tokai Tec, which
has received ISO14001 Environmental
Management System certification.