Sony CCD-TRV715 Operating Instructions (primary manual) - Page 51
Optimizing the recording condition
View all Sony CCD-TRV715 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Advanced operations STA Optimizing the recording condition Use this feature to check the tape condition before recording, so that you can get the best possible picture (ORC). (1) While the camcorder is in Standby mode, press MENU to display the menu. (2) Turn the control dial to select Ò, then press the dial. (3) Turn the control dial to select ORC TO SET, then press the dial. "START/STOP KEY" flashes. (4) Press START/STOP. The camcorder takes about 5 to 10 seconds to check the tape condition and then returns to Standby mode. 1 MENU 2 TAPE SET REC MODE ORC TO SET REMAIN TAPE SET REC MODE SP ORC TO SET REMAIN RETURN 3 TAPE SET REC MODE ORC TO SET REMAIN RETURN 4 LOCK NDBY START/STOP ORC START/STOP KEY STBY 0:00:00 Each time you insert the cassette Perform the above procedures. Notes on the ORC function •When you set ORC TO SET, the recording on the tape is erased for about 0.1 second so that the camcorder can check the tape condition. Be careful when you use a recorded tape. The 0.1 second blank is erased if you record from the point where you set ORC TO SET for more than 2 seconds, or if you record over the blank. •You cannot use this function on a tape with the red mark on the cassette exposed. 51