Sony CCD-TRV85 Operating Instructions (primary manual) - Page 25
Using alternative power sources - charger
View all Sony CCD-TRV85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Advanced operations Advanced operations Using alternative power sources You can choose any of the following power sources for your camcorder: battery pack, house current, alkaline batteries (CCD-TRV75/TRV85/TRV93 only) and 12/24 V car battery. Choose the appropriate power source depending on where you want to use your camcorder. Place Indoors Outdoors In the car Power source House current Battery pack Size AA (LR6) Alkaline battery 12 V or 24 V car battery Accessory to be used Supplied AC power adaptor Battery pack NP-F330 (supplied), NP-F530, NP-F550, NP-F730, NP-F730H, NP-F750, NP-F930, NP-F950 Supplied battery case (CCD-TRV75/TRV85/ TRV93 only) Sony car battery charger DC-V515A Notes on power sources •Disconnecting the power source or removing the battery pack during recording or playback may damage the inserted tape. •The DC IN jack has power source priority. This means that the battery pack cannot supply any power if the power cord is connected to the DC IN jack, even when the power cord is not plugged into a wall outlet. Using the house current (1) Open the DC IN jack cover, and connect the AC power adaptor to the DC IN jack on the camcorder. (2) Connect the power cord to the AC power adaptor. (3) Connect the power cord to a wall outlet. 1 2, 3 WARNING The power cord must only be changed at a qualified service shop. PRECAUTION The set is not disconnected from the AC power source (house current) as long as it is connected to the wall outlet, even if the set itself has been turned off. Note Keep the AC power adaptor away from the camcorder if the picture is disturbed. 25