Sony CD350 Operating Instructions - Page 95
Others, You cannot identify an
UPC - 027242624221
View all Sony CD350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Others Symptom Your camera does not work. The power is on, but the camera does not work. You cannot identify an indicator on the screen. The lens gets fogged. A file error occurs when you play back a file. Cause • You are not using an "InfoLITHIUM" battery pack. • The battery level is low. (The E indicator appears.) • The AC Adaptor is not connected securely. • The built-in microcomputer is not working properly. - • Moisture condensation has occurred. • The image file has an error. • The image was not recorded correctly. • The disc is dirty • The disc may be scratched. Solution p Use an "InfoLITHIUM" battery pack (page 109). p Charge the battery pack (page 11). p Connect it securely to the DC IN jack of your camera and to a wall outlet (page 14). p Disconnect, and then, after one minute, reconnect all power sources and turn on the camera. If this does not work, press the RESET button on the bottom of the camera using a fine-tipped object, then turn on the power again. (All the settings including date and time are cleared.) p Check the indicator (page 113). p Turn off the camera and leave for about an hour at room temperature for the moisture to evaporate before use (page 108). - - p Clean the disc (page 108). p Replace the disc. Troubleshooting 95