Sony CDP-XE370 Operating Instructions - Page 13

Playing CDs Fading In or Out (CDP-XE570/XE370 only) You can manually fade in or out to prevent tracks from starting or ending abruptly. Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL) connector. To Press FADER Start play fading in During pause. For the CDPXE570, "FADE" flashes. For the CDP-XE370, FADE lights up in the display and the Q indication flashes. The play fades in. End play fading out When you want to start fading out. For the CDP-XE570, "FADE" flashes. For the CDPXE370, FADE lights up in the display and the q indication flashes. Then play fades out and the player pauses. Fading time lasts for 5 seconds. Recording From CDs (CDP-XE570 only) Recording a CD by Specifying Tape Length (Time Edit) You can have the player create a programme that will match the length of the tape. In this feature, the player creates a programme basically keeping the original order of the disc. However, the player may change the last track of each side to match the recording time to the tape length. i.e. Side A: track number 1t2t3t4t8 Side B: track number 5t6t7t9t10 The programme may contain up to 24 tracks (a pause inserted between tracks is counted as one track). Note that tracks numbered over 24 cannot be programmed in this feature. 1 Press TIME EDIT before you start playing until "EDIT" appears and "TAPE A" flashes in the display. 2 Press m or M to specify the tape length. Each time you press these buttons, the display changes as shown below with the tape length of one side . HALF C-46 23.00 C-54 27.00 C-60 30.00 - -. - - C-90 45.00 C-74 37.00 When you select "HALF" The player divides the total playing time of the disc in half, keeping the original order. Note that you cannot select "HALF" when the disc has more than 24 tracks. continued Recording From CDs (CDP-XE570 only) 13