Sony CDX-4180 Instalation Manual - Page 1

Sony CDX-4180 - Fm/am Compact Disc Changer System Manual

Page 1 highlights

Installation Instalación ¶w∏À Precautions •Do not tamper with the four holes on the upper surface of the unit. They are for tuner adjustments to be made only by service technicians. •Choose the installation location carefully so the unit will not hamper the driver during driving. •Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration. •Use only the supplied mounting hardware for a safe and secure installation. Mounting angle adjustment Adjust the mounting angle to less than 60°. Precauciones •No toque los cuatro orificios de la superficie superior de la unidad. Estos orificios son para realizar ajustes del sintonizador que solamente deberán realizar técnicos de reparación. •Elija cuidadosamente el lugar de instalación de forma que la unidad no interfiera en las funciones normales de conducción. •Evite instalar la unidad donde pueda quedar sometida a altas temperaturas, como a la luz solar directa o al aire de calefacción, o a polvo, suciedad, o vibraciones excesivas. •Para realizar una instalación segura y firme, utilice solamente la ferretería de montaje suministrada. Ajuste del ángulo de montaje Ajuste el ángulo de montaje a menos de 60°. ¶w N •ßO A≥o¨O N§H C •§p A∑̶w∏À¶Ï∏m°A P r ræp∞ ß@°C • ¡◊ßK w∏À¶b a§Ë° AΩ-¶p g j m° A©Œ¶h¶«π-° BÆ∂∞ øE m° C • ¨∞§F¶w•˛©M¶w T§ß≠p° A a™∫¶w C ¶w w 60´◊•H§∫° C How to detach and attach the front panel Before installing the unit, detach the front panel. A To detach Before detaching the front panel, be sure to press (OFF) to turn off the unit. Then press (RELEASE), slide the front panel a little to the left, and pull it off toward you. B To attach Align parts A and B, and push the front panel until it clicks. A (OFF) (RELEASE) Forma de extraer e instalar el panel frontal Antes de instalar la unidad, extraiga el panel frontal. A Para extraerlo Antes de extraer el panel frontal, cerciórese de presionar (OFF) para desactivar la unidad. Después, presione (RELEASE), desplace ligeramente el panel frontal hacia la izquierda y tire de él hacia usted. B Para instalarlo Alinee las partes A y B, y presione el panel frontal hasta que chasquee. B ¶p M™˛∏À§W´e≠±™O ≠n¶w e° A U´e≠±™O° C A ≠n n©Ó®¯´e≠±™O§ß´e° A§@©w U(OFF)° CµM´·´ˆ§U(RELEASE H•¥∂}´e≠±™O° A®√¶p w™∫§Ë¶V©'•X U®"° C B≠n A©MB¶"±N´e≠±™O¿£§J d∑f¡n≈T° C A B Mounting example Installation in the dashboard 1 182 mm Ejemplo de montaje Instalación en el salpicadero 2 TOP 1 with the TOP making up con la marca TOP hacia arriba ±a TOP W° C 53 mm Bend these claws, if necessary. Si es necesario, doble estas uñas. •≤≠nÆ...° A•i¿£≈s¶±≥o®«•d§ˆ° C 3 2 ¶w∏À®" ¶w O§W Dashboard Salpicadero ªˆøˆ™O Fire wall Panel cortafuegos æræp´«´eæ¿ TOP 1 3 4 First attach 2 to the unit, then insert the unit into 1. En primer lugar,fije 2 a la unidad y, a continuación, inserte ésta en 1 2 W° AµM 1° C Mounting the unit in a Japanese car You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer. Montaje de la unidad en un automóvil japonés Usted no podrá instalar esta unidad en algunos automóviles japoneses. En tal caso, consulte a su proveedor Sony. ¶b§È•ªªs®T®Æ§W¶w ¶b¨Y®«µP§l s®T®Æ§W°A•i w A¶πÆ...°A R SonyæP C 1 With nippers or similar, cut off the claws on both side of the unit. Con unas tenazas o una herramienta similar, corte los ganchos de ambos lados de la unidad. Ω-ßQ•ŒπX§l u®„ ±N p¡l ßȱº° C Claws Ganchos •d§ˆ 2 TOYOTA 5 max. size 5 × 8 mm Tamaño máx. 5 × 8 mm ≥çj§ÿ§o 5° -8 mm to dashboard/center console al salpicadero/consola central O O Bracket Soporte §‰¨[ Bracket Soporte §‰¨[ Existing parts supplied to your car Piezas existentes suministradas con su automóvil ¶w A T®Æ™∫¶U∫ÿπs•Û°C 5 max. size 5 × 8 mm Tamaño máx. 5 × 8 mm ≥çj§ÿ§o 5° -8 mm NISSAN 5 max. size 5 × 8 mm Tamaño máx. 5 × 8 mm ≥çj§ÿ§o 5° -8 mm to dashboard/center console al salpicadero/consola central O O Bracket Soporte §‰¨[ Bracket Soporte §‰¨[ Existing parts supplied to your car Piezas existentes suministradas con su automóvil ¶w A T®Æ™∫¶U∫ÿπs•Û° C 5 max. size 5 × 8 mm Tamaño máx. 5 × 8 mm ≥çj§ÿ§o 5° -8 mm Note To prevent malfunction, install only with the supplied screws 5. Nota Para evitar que se produzcan fallos, realice la instalación solamente con los tornillos suministrados 5. o•Õ∑N•~®∆¨G° A¶w u 5° C

  • 1
  • 2

Instalación
Installation
¶w
À
Precautions
•Do not tamper with the four holes on the upper surface of the unit.
They are for tuner adjustments to be made only by service
technicians.
•Choose the installation location carefully so the unit will not
hamper the driver during driving.
•Avoid installing the unit where it would be subject to high
temperatures, such as from direct sunlight or hot air from the
heater, or where it would be subject to dust, dirt or excessive
vibration.
•Use only the supplied mounting hardware for a safe and secure
installation.
Mounting angle adjustment
Adjust the mounting angle to less than 60
°
.
Precauciones
•No toque los cuatro orificios de la superficie superior de la unidad.
Estos orificios son para realizar ajustes del sintonizador que
solamente deberán realizar técnicos de reparación.
•Elija cuidadosamente el lugar de instalación de forma que la
unidad no interfiera en las funciones normales de conducción.
•Evite instalar la unidad donde pueda quedar sometida a altas
temperaturas, como a la luz solar directa o al aire de calefacción, o a
polvo, suciedad, o vibraciones excesivas.
•Para realizar una instalación segura y firme, utilice solamente la
ferretería de montaje suministrada.
Ajuste del ángulo de montaje
Ajuste el ángulo de montaje a menos de 60
°
.
How to detach and attach the front panel
Before installing the unit, detach the front panel.
A
To detach
Before detaching the front panel, be sure to press
(OFF)
to turn off
the unit. Then press
(RELEASE)
, slide the front panel a little to the
left, and pull it off toward you.
B
To attach
Align parts
A
and
B
, and push the front panel until it clicks.
Forma de extraer e instalar el panel frontal
Antes de instalar la unidad, extraiga el panel frontal.
A
Para extraerlo
Antes de extraer el panel frontal, cerciórese de presionar
(OFF)
para
desactivar la unidad. Después, presione
(RELEASE)
, desplace
ligeramente el panel frontal hacia la izquierda y tire de él hacia usted.
B
Para instalarlo
Alinee las partes
A
y
B
, y presione el panel frontal hasta que
chasquee.
¶w
ÀÆ…
∂∑
™`
N
ßO
π
oeæ’ßÔæ˜æ
π≥
ª
≠±
•|
”§’
°
A
o¨O
≠≠∫
˚
≠◊
ßfi
N§H
˚
’æ„
տӾ
π
Æ…•OE
∫°
C
§p§fløÔæ‹æA
̶w
À¶Ï
m
°
A®oeæ˜æ
π
§£
P©Û™˝º
ær®Æ™Ã™
æræp
ß@
°
C
¡
ßKß‚æ˜æ
π
¶w
˦b
∑≈
¶a§Ë
°
A
—¶p
|™
Ω±μ∑
”Æg®Ï
ß•˙©OEßj®Ï•[ºˆæ
π
ºˆ™
Æ™
¶Ï
m
°
A©OE¶h¶«
π
°
∂∞
øE´¨™
¶Ï
m
°
C
¨
§F¶w•˛©M¶w
À
í
©T§ß
p
°
A
≠≠
®oe•OE™˛
±
a™
¶w
ˤ
™˜
°
C
¶w
À®§™
∫Ω
’æ„
’愶w
À®§¨
60´
•H§
∫°
C
¶p¶Û©Ó®¯©M™˛
À§W´e
≠±
™O
n¶w
Àæ˜æ
π
§ß´e
°
A
–•˝©Ó§U´e
≠±
™O
°
C
A
n©Ó®¯Æ…
n©Ó®¯´e
≠±
™O§ß´e
°
A§@©w
–•˝´ˆ§U
(OFF)
°
C
μ
M´·´ˆ§U
(RELEASE)
°
]ƒ¿
©Ò
°
^•H•¥
}´e
≠±
™O
°
¶p
π
oe©“•‹©
π
¶¤§w™
§Ë¶V©‘•Xß‚•¶®¯§U®”
°
C
B
n™˛
ÀÆ…
π
Ô
«
A
©M
B
¶”
±
N´e
≠±
™O¿£§J•ªæ˜¶‹
•®Ï•d
f¡n
T
°
C
1
Montaje de la unidad en un automóvil japonés
Usted no podrá instalar esta unidad en algunos automóviles
japoneses. En tal caso, consulte a su proveedor Sony.
Mounting the unit in a Japanese car
You may not be able to install this unit in some makes of Japanese
cars. In such a case, consult your Sony dealer.
¶b§È•ªªs®T®Æ§W¶w
Àæ˜æ
π
Æ…
¶b¨Y®«
μ
P§l™
§È•ªªs®T®Æ§W
°
A•i؇§£Ø‡¶w
À•ªæ˜
°
π
Æ…
°
A
–¨¢
fl¡
Ræ˜
æ
π
SonyæP
‚©
±°
C
With nippers or similar, cut off
the claws on both side of the
unit.
Con unas tenazas o una
herramienta similar, corte los
ganchos de ambos lados de la
unidad.
–ßQ•OE
π
X§l©OE
˛¶¸§u®„
±
Næ˜æ
π
®‚
º™
§p¡l
ßÈ
±
º
°
C
1
Nota
Para evitar que se produzcan fallos, realice la instalación solamente con los
tornillos suministrados
5
.
Note
To prevent malfunction, install only with the supplied screws
5
.
μ
˘
¨
®æ§Ó
μ
o•Õ
N•~®
¨G
°
A¶w
ÀÆ…•u؇®oe•OE™˛ƒ›™
¡
≥μ∑
5
°
C
2
TOYOTA
NISSAN
Bracket
Soporte
§‰¨[
5
max. size
5
×
8 mm
Tamaño
máx.
5
×
8 mm
çj§ÿ§o
5
°
—8 mm
to dashboard/center console
al salpicadero/consola central
¶‹ªˆøˆ™O
°
˛§§•
°
ªˆøˆ™O
Existing parts supplied to your car
Piezas existentes suministradas con su automóvil
¶w
ÀÆ…
°
A
–®oe•OE™˛ƒ›©Û®T®Æ™
¶U
ÿ
π
s•Û
°
C
Bracket
Soporte
§‰¨[
5
max. size
5
×
8 mm
Tamaño
máx.
5
×
8 mm
çj§ÿ§o
5
°
—8 mm
Bracket
Soporte
§‰¨[
to dashboard/center console
al salpicadero/consola central
¶‹ªˆøˆ™O
°
˛§§•
°
ªˆøˆ™O
5
max. size
5
×
8 mm
Tamaño
máx.
5
×
8 mm
çj§ÿ§o
5
°
—8 mm
3
Bend these claws, if necessary.
Si es necesario, doble estas uñas.
≤≠
nÆ…
°
A•i¿£
±≥
o®«•d§ˆ
°
C
2
1
182 mm
53 mm
TOP
with the TOP making up
con la marca TOP hacia arriba
±
a TOP ™
∫≠±
¥¬§W
°
C
5
max. size
5
×
8 mm
Tamaño
máx.
5
×
8 mm
çj§ÿ§o
5
°
—8 mm
Bracket
Soporte
§‰¨[
Existing parts supplied to your car
Piezas existentes suministradas con su automóvil
¶w
ÀÆ…
°
A
–®oe•OE™˛ƒ›©Û®T®Æ™
¶U
ÿ
π
s•Û
°
C
Claws
Ganchos
•d§ˆ
Mounting example
Installation in the dashboard
Ejemplo de montaje
Instalación en el salpicadero
¶w
À®“
¶w
À©Ûªˆøˆ™O§W
B
A
(OFF)
(RELEASE)
B
A
TOP
1
Fire wall
Panel cortafuegos
æræp´«´eæ¿
Dashboard
Salpicadero
ªˆøˆ™O
First attach
2
to the unit, then insert the unit into
1
.
En primer lugar,fije
2
a la unidad y, a continuación, inserte ésta en
1
.
≠∫
•˝ß‚
2
À®Ïæ˜æ
π
§W
°
A
μ
M´·ß‚æ˜æ
π
¥
°
®Ï
1
°
C
3
4
2