Sony CDX-GT540UI Operating Instructions - Page 19
Using optional equipment - car stereo
UPC - 027242774124
View all Sony CDX-GT540UI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Z.TIME (Zappin Time) Selects the playback time for the ZAPPIN function. - "Z.TIME-1 (about 6 seconds)," "Z.TIME-2 (about 9 seconds)," "Z.TIME-3 (about 30 seconds)." LPF*3 (Low Pass Filter) Selects the subwoofer cut-off frequency: "OFF," "80Hz," "100Hz," "120Hz," "140Hz," "160Hz." LPF NORM/REV*3 (Low Pass Filter Normal/ Reverse) Selects the subwoofer phase: "NORM," "REV." HPF (High Pass Filter) Selects the front/rear speaker cut-off frequency: "OFF," "80Hz," "100Hz," "120Hz," "140Hz," "160Hz." LOUD (Loudness) Reinforces bass and treble for clear sound at low volume levels: "ON," "OFF." BTM (page 12) *1 When the unit is turned off. *2 When FM is received. *3 When the audio output is set to "SUB-OUT." Using optional equipment Auxiliary audio equipment By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below: Connecting the portable audio device 1 Turn off the portable audio device. 2 Turn down the volume on the unit. 3 Connect to the unit. Connecting cord* (not supplied) * Be sure to use a straight type plug. Adjust the volume level Be sure to adjust the volume for each connected audio device before playback. 1 Turn down the volume on the unit. 2 Press (SOURCE/OFF) repeatedly until "AUX" appears. After that, "AUX FRONT IN" appears. 3 Start playback of the portable audio device at a moderate volume. 4 Set your usual listening volume on the unit. 5 Adjust the input level (page 17). 19