Sony CFD-S20CP Operating Instructions - Page 13
Press, to start recording, is depressed automatically., Interference Suppress
View all Sony CFD-S20CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Basic Operations 3 Press z to start recording (n is depressed automatically). Use these buttons for additional operations POWER TAPE Tips • Adjusting the volume or the audio emphasis (see page 21) will not affect the recording level. • If the AM program makes a whistling sound after you've pressed z in step 3, press MODE to select the position of ISS (Interference Suppress Switch) that most decreases the noise. • For the best results, use the AC power as a power source. • To erase a recording, proceed as follows: 1 Insert the tape whose recording you want to erase. 2 Press TAPE. 3 Press z. To stop recording pause recording turn on/off the player xZ X Press xZ X Press the button again to resume recording. POWER 13
Basic Operations
13
To
Press
stop recording
xZ
pause recording
X
Press the button again to
resume recording.
turn on/off the player
POWER
3
Press
z
to start recording
(
n
is depressed automatically).
Use these buttons for additional operations
Tips
•
Adjusting the volume or the
audio emphasis (see page
21) will not affect the
recording level.
•
If the AM program makes a
whistling sound after
you’ve pressed
z
in step 3,
press MODE to select the
position of ISS
(Interference Suppress
Switch) that most decreases
the noise.
•
For the best results, use the
AC power as a power
source.
•
To erase a recording,
proceed as follows:
1
Insert the tape whose
recording you want to
erase.
2
Press TAPE.
3 Press
z
.
X
POWER
TAPE
xZ