Sony CFD-S39 Operating Instructions - Page 11

Use these buttons for additional operations, Press, POWER, FUNCTION, Tape directrion, indicators

Page 11 highlights

Basic Operations 3 4 REC(FWD) Make sure that · (forward) of DIR the tape direction indicators is lit. If ª (reverse) is lit, push DIR in the direction of the arrow to switch the tape directrion. Press r to start recording (( is depressed automatically). Tape directrion indicators TAPE Note Recording can be made only on the forward side regardless of the position of the DIR MODE switch. If ª (reverse) of the tape direction indicators is lit, the r button cannot be pressed. Tips • Adjusting the volume or the audio emphasis (see page 27) will not affect the recording level. • For the best results, use the AC power as a power source. • To erase a recording, proceed as follows: 1 Insert the tape whose recording you want to erase. 2 Press FUNCTION to select "TAPE". 3 Press r. Use these buttons for additional operations p6 P POWER FUNCTION To stop recording pause recording turn on/off the player Press p6 P Press the button again to resume recording. POWER BasicOperations 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

BasicOperations
Basic Operations
11
3
Make sure that
·
(forward) of
the tape direction indicators is lit.
If
ª
(reverse) is lit, push DIR in
the direction of the arrow to
switch the tape directrion.
4
Press
r
to start recording
(
(
is depressed automatically).
Use these buttons for additional operations
Note
Recording can be made
only on the forward side
regardless of the
position of the DIR
MODE switch. If
ª
(reverse) of the tape
direction indicators is
lit, the
r
button cannot
be pressed.
Tips
Adjusting the volume or
the audio emphasis (see
page 27) will not affect
the recording level.
For the best results, use
the AC power as a
power source.
To erase a recording,
proceed as follows:
1
Insert the tape whose
recording you want to
erase.
2
Press FUNCTION to
select “TAPE”.
3 Press
r
.
To
Press
stop recording
p6
pause recording
P
Press the button again to
resume recording.
turn on/off the player
POWER
P
POWER
FUNCTION
p6
REC(FWD)
DIR
TAPE
Tape directrion
indicators